Elive

Help us in a better way with reports that includes all the needed (but not excesive) information and how to reproduce it. It may not mean a lot to you, but it means a world to us.

IDOpenedLast EditedTask TypeSummaryStatusOpened byProgressDue In Version  desc
 344 2009-02-162017-08-25Feature Request limit windows to be in the screen ClosedThanatermesis
100%
3.01 Task Description

Could be nice if we have an e17 module to limit the windows to be in the screen limits, instead to pass over it. This is a useful feature for non-experienced users.

Note: this report has somewhere (i dont remember where) a list of features needed, like which options to have on it (like: limit the windows to be in-screen, limit the windows to be not entirely out of the screen, allow the window to be partially out, etc etc), is needed to check this list first (in hackers or in dev ? i dont remember right now)

Useful code: iirk module

 513 2009-12-032017-08-02Bug Report Wifi problem on Dell D410 ClosedGuillaume hatt
100%
3.01 Task Description

Hi,
I use elive installed on a Dell D410 laptop with Broadcom BCM4311 wifi card. I can see networks, but I’m unable to connect to anyone because dhclient is unable to obtain an IP address.
I tried other wifi cards (Realtek, D-Link), and it is always same problem. All these cards are supported by Debian Lenny or Ubuntu 8.04.
I really like elive and wouldn’t go back to Lenny because of this wifi problem.

Thanks for help.
G. Hatt

uname -r:
2.6.26.8-elive-686

lspci :
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC’97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC’97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
02:01.0 CardBus bridge: Texas Instruments PCI6515 Cardbus Controller
02:01.5 Communication controller: Texas Instruments PCI6515 SmartCard Controller
02:03.0 Network controller: Broadcom Corporation BCM4311 [AirForce 54g] 802.11a/b/g PCI Express Transceiver (rev 02)

 576 2010-04-272017-08-27Bug Report net-connector: Stop to SCAN networks if we are connecte ...ClosedThanatermesis
100%
3.01 Task Description

If we are already connected to internet is useless to scan about networks, disable the scan until we are disconnected (the non-stop scanning thing makes that some wireless drivers blocks and a reboot is required to recover the connection)

 553 2010-03-062010-03-15Bug Report swedish boot option ClosedThanatermesis
100%
3.01 Task Description

<PrinceAMD> Thanatermesis, <Elive_user25_en> If one choose swedish as language in textmode boot.
<PrinceAMD> <Elive_user25_en> Everything is translated into...
<PrinceAMD> <Elive_user25_en> finnish.
<PrinceAMD> <Elive_user25_en> that has not one word in common with swedish

 555 2010-03-062014-06-05Bug Report volume still setup to 100% after first install of Topaz ClosedRoman Vik
100%
3.01 Task Description

After upgrade system from ISO the volume setup to 100% - too loud for the first time..

 562 2010-03-202010-03-20Bug Report autolaunchers with spaces ClosedThanatermesis
100%
3.0 Task Description

Looks like when the partition label has a space, blocks e17

 573 2010-04-082017-08-25Bug Report autolaunchers: disable when needed (gparted) ClosedThanatermesis
100%
3.0 Task Description

Before to run the mount function, check if gparted/fdisk/cfdisk/* is running in order to avoid problems

 613 2014-04-102017-08-27Bug Report xrandr / e17 screens after play a game isn't restored ClosedThanatermesis
100%
3.0 Task Description

xrandr / e17 screen confs are not restored after to have played a game or launched some applications that changes the screen sizes

Try for example with “smc” (super mario chronicles) package in debian

WARNING: “cd .e ; bkp s”, it will broke your e17 conf

Note: maybe only in xinerama ?

 620 2014-06-212017-08-25Bug Report Umounting in thunar fails ClosedThanatermesis
100%
3.0 Task Description

Kill tumblerd always before umounting a partition

~ ps aux | grep 30017
1000 1868 0.0 0.0 5188 732 pts/0 SN+ 17:35 0:00 grep 30017
1000 30017 4.5 3.4 517740 68508 ? Sl 17:12 1:02 /usr/lib/i386-linux-gnu/tumbler-1/tumblerd
~

 632 2014-08-192014-09-26Bug Report Thunar @Folder > right click > create document freeze ClosedJonas Kervin Hansen
100%
3.0 Task Description

OS: Elive Topaz+ (beta)
Arch: 32bit (x86)
update status: Fully up to date as per official elive repos.

how to reproduce:
Open a folder in Thunar, right click, point at create document = window manager freeze (Entrance?)

heres a video for demonstration:
External Link

 645 2015-01-152017-08-27Bug Report E resolution is fucked sometimes ClosedThanatermesis
100%
3.0 Task Description

If you run something like “berusky” (small game, which don’t works in fact), it fucks your X resolution without possibility to recover it (BIG BAD BUG)

In short it seems like to: change your E resolution, don’t restore the original one, but E saves and remebers it

We should need a way to detect that the resolution was changed by FOO, when FOO finishes and some seconds passed change the resolution to the original one if we are not on it (not sure if this is possible)

Also, is needed to save the resolution on E confs only when we select to save it, seems like there’s a trigger that saves it automatically, this is very bad :P

Notes: betatest in e19 to see if the bug is solved (and so just cherry-pick the fixes)

 174 2007-11-202017-08-25Bug Report Kino does not capture ClosedClaudia
100%
3.0 Task Description

Hi all!
I’ve try to capture whit kino, but give me this error:

WARNING: raw1394 kernel module not loaded or faliure to read/write /dev/raw1394!

what can i do?
thanx!!!

 489 2009-10-092017-08-26Bug Report double wireless interfaces is not correctly managed ClosedThanatermesis
100%
3.0 Task Description

When there’s 2 wireless interfaces listed in NC, when you select one of them, NC comes back to the other one

Note: looks like there’s also a problem related with the scanning, like too much fast scannings etc
Note: somebody has reported me that if you put your password and between you are doing this the list is scanned (updated), your password is removed

 494 2009-10-172017-08-26Bug Report Installing crossover games causes X server/enlightenmen ...ClosedJustin Raug Veggerby
100%
3.0 Task Description

Installing Crossover Linux (both Pro and Games) from CodeWeavers causes either enlightenment or Xorg to hang or crash.

When the install is finishing up Xorg/enlightenment freezes, mouse can be moved, but nothing happens - and I am unable to change to another desktop using CTRL + ALT + arrow key

The same thing happens when trying to install applications or managing bottles. Though sometimes I get an error message that enlightenment has SEGV’ed with the options to Recover or Quit.

I think it might be when Crossover tries to generate menu links for the application, but I am not entirely sure.

I am sorry to say that this used to work under Ubuntu/enlightenment.

You can download a trial of Crossover Games here:
http://www.codeweavers.com/products/cxgames/download_trial/

(This is important for gamers - hence the severity)

 504 2009-11-012017-08-25Feature Request MSI 5200le onli 640x480 resolution avaliable Closedhernan m
100%
3.0 Task Description

Elive cant mannage this video board, msi5200le (nvidia), no way to make it work in higher resolution than 640×480

 563 2010-03-212017-08-25Bug Report vpn ad-hoc ClosedSpirit
100%
3.0 Task Description

No funciona la conexión punto a punto
Thank you

 568 2010-03-282017-08-26Bug Report 3g-dialer doesn't ask for user, password, apn. ClosedLorenzo Maceiras
100%
3.0 Task Description

3g-dialer does not ask for user and password. Also, apn is ignored too. The apn of Ancel Uruguay in the template is wrong (it is wrong in other distros of Linux too), must be “adslmovil” not “gprs”. So, the dialer does not connect to the Internet with 3g modems. Tested witha a Huawei e226.

 600 2013-02-062014-10-31Bug Report sound card problem with intel models 3400 ClosedThanatermesis
100%
3.0 Task Description

This workaround in needed for these models 3400

root $ echo “options snd_hda_intel model=auto” » /etc/modprobe.d/alsa-base.conf ; rmmod snd_hda_intel ; modprobe snd_hda_intel

 607 2013-05-312017-08-26Bug Report e17 Menus Freezes after Wizard (not solved) ClosedThanatermesis
100%
3.0 Task Description

Lastest e17, after to finish wizard go fast to the applications menu and scroll it, e17 freezes

This bug reported by AlexAnteMachina has nothing to do with composite, not even with vbox, I tried it in laptop and e17 simply gets frozen, seems like X11 is died, very strange bug! even with my libs updated without the optimize options (please somebody confirm that we have debug messages now), there’s simply no way to get a backtrace because everything is blocked (well, you can kill X11, but you lose everything)

Maybe there’s not even needed to select German language, it looks like an efreet bug


This is another bug, but seems like caused by the same reason, sometimes, and just sometimes, e17 starts looking like this (some hang in the startup of efreet, or uncomplete or similar, idk)
http://main.elivecd.org/tmp/enlightenment/shot-2013-06-01_22-24-45.jpg

A restart of e17 will solve the problem, but is not a good way to start e17 of course


Another bug: if you install eltrans (here is elive in version 2.1.40), and you try to open the menus, it becomes frozen

 621 2014-06-262017-08-26Bug Report Kernel 3.14.7 and Vbox 4.3.12 ClosedDeon Thomas
100%
3.0 Task Description

seem vbox is out of date with this really new kernel so the vboxdrv modules segf somewhere in the kernel, I suggest using a kernel that is supported by vbox, this problem is only with vbox.

 643 2014-12-262017-08-27Bug Report Most of .desktop doesn't respect XDG_DATA_DIRS ClosedThanatermesis
100%
3.0 Task Description

XDG_DATA_DIRS defines the order to where to search for .desktop files, for example we have apulse-skype package that replaces a .desktop that is defined on a previous dir on this variable, this perfectly works if you run skype from menus (skype that requires pulseaudio using a pulseaudio emulator work in alsa-only), but if you run it from engage or from ibar, it doesn’t works (so looks like it gots the .desktop from the default dir instead of the one that we have defined), it doesnt works also from other places like “startup applications”

 660 2017-10-082017-10-26Bug Report Black screen  ClosedVlado Poleva
100%
3.0 Task Description

Hi,

I have yesterday finished installation of last beta version. Unfortunately I wasn’t front of my laptop when the installation process went to an end. I think that there’s probably on last step something like how to boot the system isn’t it? Now the system doesn’t boot and I can’t access bios... Have you some idea what to now? I’ m using Lenovo ThinkPad E530c.
Thanks.

BR,

Vlad.

 158 2007-09-072017-08-25Bug Report Cinelerra won't launch under "tests" e17 ClosedSteve Folberg
100%
3.0 Task Description

Cinelerra won’t launch for me using the latest e17 from the “tests” branch of the Elive repos (it has never launched, even when I tried
it under the default e17 from Gem).

When I try to run it, I get a small, transparent window in the upper
left corner of my screen. When I close that window, I get this error
message:

“Application Execution Error: Cinelerra stopped running unexpectedly.
There was no error message. An exit code of 1 was /usr/bin/cinelerra.”

By the way, it does launch under e16, but with an error message about memory...

 384 2009-03-242017-08-25Feature Request wifi link intel pro 5100 agn Closedmanu
100%
3.0 Task Description

The intel pro 5100 wifi card doesn’t work with Elive. There is an Intel driver : intel linux driver but I’m a newbie and I don’t know how to install it ... Somebody can help me ? thanks!

 505 2009-11-012017-08-25Bug Report 1.9.42 compiz - wlan0 .... kernel panic!! RTL-818 ...Closedhernan m
100%
3.0 Task Description

1.9.42 compiz live cd cant boot up, the machine get frizzed with this error msg on screen:

Network device wlan0 detected, DHCP broadcasting for ip. [ 40.783723] Kernel panic - not syncing: HwthreeWire() CmdReg: 0XFF RE|WE bits are not clear!!
[40.783727]

I have to say that on 1.0 this realtek (RTL-8185) pci wifi board didnt work (the system did not recognized it), but livecd have been loaded ok, the instalation was ok, and the system was full working
On 1.9.50 / 51 the wifiboard works perfectly

 541 2010-02-042017-08-26Bug Report Enlightenment SEGV while changing resolution ClosedMichal/ Wernicki
100%
3.0 Task Description

When trying to change resolution screen goes black and a box appears showing that Enlightenment SEGV’d.

To reproduce this bug please boot Elive from a CD, selecting automatic resolution. After full boot up enter Settings Panel/Screen/Resolution and choose some other resolution and frequency but do not save your selection, just click “restore” button and then change frequency again. Now this crash should happen.
I supose this behaviour is easier to reproduce using CRT display.

My guess is that this SEGV happens because when you mark resolution and frequency for the first time and cancel, the choice of resolution is not remembered, but you are still able to choose frequency and try to set it.

My rig has GeForce 5700 FX and thus uses nvidia 173 driver.

 554 2010-03-062017-08-25Bug Report 2.0 : scrolling disabled with touchpad ClosedJean-Francois Blazy
100%
3.0 Task Description

Version 2.0 new kernel Topaz

laptop Dell Vostro13, touchpad synaptics, gsynaptics 0.9.14-6 installed

No scrolling at all with the touchpad (vertical, horizontal...)

tap is ok (double tap= 1 click)

It seems that’s it doesn’t work at all, when I try to load the touchpad menu, I get :
“Synaptics couldn’t initialize.
You have to set ‘SHMConfig’ ‘true’ in xorg.conf or XF86Config to use GSynaptics”

I’ve added these lines to the xorg.conf file, and also a shmconfif in hal (like in this doc : http://doc.ubuntu-fr.org/touchpad ...in french), reloaded the system and nothing (the ibar only disappear the 1st time...)

saw on some boards it could be a problem with the kernel (?)

 586 2010-08-122017-08-27Bug Report Shared Folders: read-write not working Closedanabell
100%
3.0 Task Description

When trying to share folders in the file-manager, it doesn’t allow you to share it as read-write mode, the permissions are correctly set to the folder to be writable by anyone

 598 2013-01-112017-08-27Bug Report smb-admin breaks smb.conf ClosedDeon Thomas
100%
3.0 Task Description

after to create a user in samba (previously on my system), i can’t share folders anymore”, and this message:

$ smb-usershare -p princeamd/                           % 
net usershare: usershares are currently disabled
 Traceback (most recent call last):
 File "/usr/bin/smb-usershare", line 580, in <module>
  gui.msgbox(START_MSG)
 TypeError: msgbox() takes exactly 3 arguments (2 given)
 612 2014-03-182017-08-27Bug Report Upgrade mode bugs ClosedThanatermesis
100%
3.0 Task Description

Multiple reports:

- If you run the upgrade mode with the beta version, it doesnt seems to boot it (file not found)

- The entry from grub is not removed after the first (any state) reboot

- The installer of 3.0 needs to be adapted

 636 2014-08-302017-08-26Bug Report windows moves to the first screen ClosedThanatermesis
100%
3.0 Task Description

You said recently that you have found the cause of the bug where teh windwos are positioned in the first screen (xinerama) when looking at something else about borders?, but i still having the bug around, did you commited the fix ?

 640 2014-11-272017-08-27Bug Report E segfaults when pressing power button + keyboard keys ClosedThanatermesis
100%
3.0 Task Description

If you press the power button (which shows a menu option in E to close computer) and extremely-fastly you press any keyboard key, you got a segfault

This can help making it to appear: cd /tmp ; mprime-cpu -t
Also if you add a “drop caches” on that command should help too, giving you more human-time over computer-time

<PrinceAMD> what i think is happening here is
<PrinceAMD> an object is deleted, then a key pressed on the object causes seff
<PrinceAMD> so i think some check is needed in _e_manager_cb_key_down
<PrinceAMD> i'm guessing this is a keybinding bug, so lets say the binding trigger a call of a deleted pointer,
Thread 1 (Thread 0xb5c619a0 (LWP 7261)):
#0  0xb7270607 in pause () at ../sysdeps/unix/syscall-template.S:82
No locals.
#1  0x0807ba9e in e_alert_show () at e_alert.c:38
No locals.
#2  0x08160903 in e_sigseg_act (x=11, info=0xbfe18b8c, data=0xbfe18c0c) at e_signals.c:71
No locals.
#3  <signal handler called>
No symbol table info available.
#4  0x00000020 in ?? ()
No symbol table info available.
#5  0x081479d9 in e_object_del (obj=0x9964768) at e_object.c:54
No locals.
#6  0x080808cf in _e_actions_act_halt_go (obj=0x9678cd8, params=0x0) at e_actions.c:2265
No locals.
#7  0x08089591 in e_bindings_key_down_event_handle (ctxt=E_BINDING_CONTEXT_MANAGER, obj=0x9678cd8, ev=0x996d9e8) at e_bindings.c:514
        act = 0x9894d78
        mod = E_BINDING_MODIFIER_NONE
        binding = 0x98cac98
        l = 0x98c9c80
#8  0x0813764c in _e_manager_cb_key_down (data=0x9678cd8, ev_type=50, ev=0x996d9e8) at e_manager.c:758
        man = 0x9678cd8
        e = 0x996d9e8
#9  0xb6f95c2f in _ecore_call_handler_cb (func=0x81375e8 <_e_manager_cb_key_down>, data=0x9678cd8, type=50, event=0x996d9e8) at lib/ecore/ecore_private.h:359
        r = 1 '\001'
#10 0xb6f96b6a in _ecore_event_call () at lib/ecore/ecore_events.c:562
        ret = 1 '\001'
        e = 0x9a8ca58
        handle_count = 2
        l = 0x0
        l_next = 0x0
        eh = 0x95e1df0
#11 0xb6fa1167 in _ecore_main_loop_iterate_internal (once_only=0) at lib/ecore/ecore_main.c:1942
        next_time = 0.24938403899795958
#12 0xb6f9f419 in ecore_main_loop_begin () at lib/ecore/ecore_main.c:983
No locals.
#13 0x08078164 in main (argc=1, argv=0xbfe1a284) at e_main.c:1138
        nostartup = 0 '\000'
        safe_mode = 0 '\000'
        after_restart = 1 '\001'
        waslocked = 0 '\000'
        t = 1417114627.236887
        tstart = 1417114627.236887
        s = 0x0
        buff = "1417114627.2\000\277{\267@\304z\267\001\000\000\000\000\020e\266\240\221", <incomplete sequence \341\277>
        action = {__sigaction_handler = {sa_handler = 0x8160988 <e_sigabrt_act>, sa_sigaction = 0x8160988 <e_sigabrt_act>}, sa_mask = {__val = {0 <repeats 32 times>}}, sa_flags = -1073741820, sa_restorer = 0xbfe18fd0}
        __FUNCTION__ = "main"
 659 2017-08-262017-08-26Feature Request Backbutton in install ClosedGrottem
100%
3.0 Task Description

a back button is needed in during the installation progress

 262 2008-10-162017-08-25Feature Request Wacom ClosedThanatermesis
100%
3.0 Task Description

Made something nice to made working by default wacom devices in Elive

 286 2008-11-072017-08-26Feature Request amsn SVN is now supporting audio-video conferencing and ...ClosedAgostino
100%
3.0 Task Description

amsn in svn now supports audio conferencing as well as audio video calls.
also is very stable.
tested in ubuntulu

 293 2008-11-112017-08-25Feature Request Gdebi should notice user when installing manually packa ...ClosedAgostino
100%
3.0 Task Description

installing unofficial packages is a very bad practice, it can broke the system. We need to notice the user with a popup in gdebi about this issue.

 317 2008-12-112017-08-25Bug Report Fonts for special languages not installed by default ClosedThanatermesis
100%
3.0 Task Description

Looks like not all the fonts for special languages are installed by default (see google translator for chinese or japanese, or see also to configure hte language with langconf (characters not readable for some languages)), langconf should show ALL the caracters because i have made it one by one and i have read all of them

Could be need to try to install manually some font packages and see which ones are remaining, but WARNING, some fonts packages takes a LOT of space in hard disk and the size of the ISO is pretty limited, install just the ones that are needed, not waste space of the limited ISO size standard

Note: is possible that could be need to restart X after to install a font. Use the livecd mode better

 319 2008-12-122017-08-25Bug Report eeepc brightness apci script should be linked to correc ...ClosedAgostino
100%
3.0 Task Description

/etc/laptop-mode/conf.d/lcd-brightness.conf

+BATT_BRIGHTNESS_COMMAND="echo 3"
+LM_AC_BRIGHTNESS_COMMAND="echo 15"
+BRIGHTNESS-OUTPUT="/sys/class/backlight/eeepc/brightness"

this is the most up to date and correct link to be set up in laptop-mode tools.

 345 2009-02-162017-08-25Feature Request Popup information for windows ClosedThanatermesis
100%
3.0 Task Description

Like it says in the review article http://news.softpedia.com/news/Elive-Compiz-104523.shtml , when you mouse-in around a window in the pager or the minimized applications, there’s not a kind of popup information about “what” is that window, could be nice to add this feature ?

 365 2009-02-252017-03-16Feature Request aMule has wrong configuration (download dirs) ClosedThanatermesis
100%
3.0 Task Description

The default download directories of aMule are not userfriendly at all

 369 2009-03-032017-03-16Bug Report OSS compatibility ClosedThanatermesis
100%
3.0 Task Description

Games like Wolfenstein not works directly by default, made a compatibility for this, start by add a script to load all the snd-*-oss modules at the init of the system, then see if directly works or needs to run with “aoss” (not so nice way (userfriendly))

http://en.gentoo-wiki.com/wiki/Enemy_Territory

http://www.gentoo-wiki.info/TIP_ALSA_with_Quake3/Enemy_Territory

 379 2009-03-072017-03-16Feature Request HandBrake  ClosedNawar
100%
3.0 Task Description

HandBrake is an open-source, GPL-licensed, multiplatform, multithreaded video transcoder, available for MacOS X, Linux and Windows.

http://handbrake.fr/

Supported sources:

  • Any DVD-like source: VIDEO_TS folder, DVD image or real DVD (unencrypted–protection methods including CSS are not supported internally and must be handled externally with third-party software and libraries), and some .VOB and .TS files
  • Most any multimedia file it can get libavformat to read and libavcodec to decode.

Outputs:

  • File format: MP4, MKV, AVI or OGM
  • Video: MPEG-4, H.264, or Theora (1 or 2 passes or constant quantizer/rate encoding)
  • Audio: AAC, MP3, Vorbis or AC-3 pass-through (supports encoding of several audio tracks)

Misc features:

  • Chapter selection
  • Basic subtitle support (burned into the picture)
  • Integrated bitrate calculator
  • Picture deinterlacing, cropping and scaling
  • Grayscale encoding

Would you please add this Programm to the Repos.

Best Regards,
FreeEagle

 442 2009-07-192017-08-26Bug Report eeepc-elive-scripts patch (camera not working) ClosedGatis Visnevskis
100%
3.0 Task Description

See diff for /etc/init.d/eeepc-elive-scripts:

#diff eeepc-elive-scripts.old eeepc-elive-scripts
23c23
< echo -n 1 » /proc/acpi/asus/camera 2>/dev/null

echo -n 1 » /sys/devices/platform/eeepc/camera 2>/dev/null

Reason: 2.6.26 and later kernel has moved /proc/acpi/asus to /sys/devices/platform/eeepc

I will check also other scripts, volume, brightness, etc...

 457 2009-08-172017-08-25Bug Report Intel Wireless pro 5100AGN card not working Closedlean moha
100%
3.0 Task Description

problems getting Intel Wireless pro 5100AGN card working. According to all wiki the iwlagn module and mac8*** module required to run these cards should be built into the kernel but not there and for some reason elive doesn’t allow its installation. The iwlagn module is different from the iwp module.

 462 2009-08-252017-08-26Bug Report .xsession-errors ClosedThanatermesis
100%
3.0 Task Description

.xsession-errors file of the home of the users, contains the logs of the X when they are running, this should be removed at every e17 startup

 463 2009-08-252017-08-27Bug Report Power management ClosedThanatermesis
100%
3.0 Task Description

Use only one power management daemon, maybe disable cpufreq of e17 and use only gnome-powermanager IF is a laptop ? maybe ask that ? maybe predefine selection by hardware specs ?

 465 2009-08-252017-08-25Feature Request Request for 802.1x wireless authentification to be incl ...ClosedMark Misulich
100%
3.0 Task Description

PLEASE be describable, clear, and direct. Think that we need to understand, found, and solve the bug.

I would like to request that 802.1x authentification be added to the wireless network connector utility. The company where I work uses this mode of wireless authentification. It would be a great convenience to me at work, as I have to use a wired connection otherwise.

 477 2009-09-052010-01-22Bug Report network tool doesn't work Closedmarkus frei
100%
3.0 Task Description

In the latest compiz dev release (1.9.42 unstable compiz) I can’t enter a static IP. It always reverts back to dhcp when I try to apply the proper address.

 484 2009-09-232017-08-26Bug Report module slamr does not exist bug STILL EXISTS (not cured ...ClosedJohn Vincent
100%
3.0 Task Description

Hi, sorry to have to report, I just tried to install (with a proven DVD download of E17 compiz) on a 2nd computer, Intel MB DG45FC. First problem was it would not recognize display resolution, I am using Mitsubishi Diamond Digital, wide screen (16 x 9) and factory default setting called for is 1280 x 768 at 60HZ—which is in listed choices upon installation, nor any other resolution including auto? This is a 64bit machine, I have the DVD installed OK, no problem, on a Gigabyte 32bit MB.

I kept trying, over and over and somehow was able to “force” installation after being given a choice to use a pre-existing resolution(?) Install completed, fine tune came up and stopped at: “module slamr does not exist in /proc/modules. Also, internet connect was not able to be made, no matter what I tried so I can make no correction through apt-get, Synaptic or .deb. I also got a notice that e17 economorph failed to install because of some file in libdecorate(?) was trying to overwrite an already existing file. Not being technically capable, I haven’t a clue.

But please, do not fool yourself into thinking the slamr “bub” has been corrected and gone away, it is still there.

 487 2009-10-052017-08-25Feature Request kernel added in grub when installed ClosedThanatermesis
100%
3.0 Task Description

postinstall of kernel-image should call grub-aggregator from nurse

Showing tasks 1 - 50 of 84 Page 1 of 21 - 2 -

Available keyboard shortcuts

Tasklist

Task Details

Task Editing