Elive

ID Opened Last Edited Task Type Summary Status Opened by Progress Due In Version   desc
 576 2010-04-272020-10-05Bug Report net-connector: Stop to SCAN networks if we are connecte ...Closedthanatermesis
100%
3.01 Task Description

If we are already connected to internet is useless to scan about networks, disable the scan until we are disconnected (the non-stop scanning thing makes that some wireless drivers blocks and a reboot is required to recover the connection)

 555 2010-03-062014-06-05Bug Report volume still setup to 100% after first install of Topaz Closedconny
100%
3.01 Task Description

After upgrade system from ISO the volume setup to 100% - too loud for the first time..

 553 2010-03-062010-03-15Bug Report swedish boot option Closedthanatermesis
100%
3.01 Task Description

<PrinceAMD> Thanatermesis, <Elive_user25_en> If one choose swedish as language in textmode boot.
<PrinceAMD> <Elive_user25_en> Everything is translated into...
<PrinceAMD> <Elive_user25_en> finnish.
<PrinceAMD> <Elive_user25_en> that has not one word in common with swedish

 513 2009-12-032017-08-02Bug Report Wifi problem on Dell D410 Closedghatt
100%
3.01 Task Description

Hi,
I use elive installed on a Dell D410 laptop with Broadcom BCM4311 wifi card. I can see networks, but I’m unable to connect to anyone because dhclient is unable to obtain an IP address.
I tried other wifi cards (Realtek, D-Link), and it is always same problem. All these cards are supported by Debian Lenny or Ubuntu 8.04.
I really like elive and wouldn’t go back to Lenny because of this wifi problem.

Thanks for help.
G. Hatt

uname -r:
2.6.26.8-elive-686

lspci :
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC’97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC’97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
02:01.0 CardBus bridge: Texas Instruments PCI6515 Cardbus Controller
02:01.5 Communication controller: Texas Instruments PCI6515 SmartCard Controller
02:03.0 Network controller: Broadcom Corporation BCM4311 [AirForce 54g] 802.11a/b/g PCI Express Transceiver (rev 02)

 344 2009-02-162017-08-25Feature Request limit windows to be in the screen Closedthanatermesis
100%
3.01 Task Description

Could be nice if we have an e17 module to limit the windows to be in the screen limits, instead to pass over it. This is a useful feature for non-experienced users.

Note: this report has somewhere (i dont remember where) a list of features needed, like which options to have on it (like: limit the windows to be in-screen, limit the windows to be not entirely out of the screen, allow the window to be partially out, etc etc), is needed to check this list first (in hackers or in dev ? i dont remember right now)

Useful code: iirk module

 708 2018-07-092018-07-09Bug Report Directory names should be not rewrited when different l ...Closedthanatermesis
100%
3.0 Task Description
  • Install the system in Language A
  • New desktop configuration, selecting language B
  • Re-login in destkop, directory names wants to be renamed (not!!)

This is due to some gnome xdg pre-desktop launcher that knows the language of the system but not the one that we have selected in the desktop

Notes:

  • Brainstorming: on which cases we should want to have the directories renamed? only from elive-topaz (statically english) maybe
 705 2018-07-012018-11-23Betatesting Multiple screens betatesting Closedthanatermesis
100%
3.0 Task Description

The new multiple screens betatesting is ready to be used, this task will be to better track all that is needed to betatest:

How to use it: Everything should be automated, so just upgrade your system with the command “apug” and restart to a new desktop configuration (from elive menus), which is important too. It should detect that you have multiple screens and ask you to configure them, or use an existing configuration, etc in contrary case you still have the configurator available (only one now, which is an elive tool)

Things to betatest: This is the list:

  1. all the options and behaviours (what if select no, yes, save, not save, remove, etc), this is more or less already betatested by me
  2. try to disconnect the extra screen, reboot computer, your desktop should be equally functional (and I assume not asking/saying anything about)
  3. poweroff again the computer, connect again the extra screen, it should remember that configuration for your second screen and going back to these settings (without asking anything, i assume)
  4. there’s some games that changes your screen resolution (in order to play in fullscreen), if the game exits with an error your desktop is messed up (desktop running in a strange resolution), the normal behaviour is to return to the correct resolution when the game exits correctly, but i dont know if this happens or even if goes to the correct multiscreen mode. Also: a reboot should perfectly return to the normal behaviour
  5. maybe already said before, but switching between “using and not using” the external screen should be not a painful experience (and/or with reboots), it should be “work on the fly”
  6. ecomorph (special effects) should work correctly, except for the “exposé effect” which doesn’t seems to like it so much (confused numbers of desktops, etc, not sure if this one works better after the full implementation)
  7. detail: technically speaking, there’s two launching of the “load screen settings”, one happens before the desktop is loaded and the other when the desktop has started to load... in other words: if there’s a widget/question that asks for anything it should always happen when you already have access to the window controls (including window borders for example)
  8. since i found a strange behavior with the “automated fonts sizing calculation” feature, i include this betatest point: test if the font sizes are not reconfigured “smaller than normal”
  9. we have hotkeys to switch between virtual desktops, do we have a setup for between screens? i just tried to configure a new keyboard hotkey (ctrl + alt + shift + arrows) for switch to another screen 0/1 but doesn’t looks like to work on virtualbox... will need to do test in a real machine (and implement the hotkey in the default configuration)

Notes: if any of these betatests are not working as expected, please include the details of the “steps” about how to reproduce it, and the exact (first words) of the “conflicting” message found

 676 2018-02-182018-05-06Bug Report caps lock don't affect top row numbers and special char ...Closedgrottem
100%
3.0 Task Description

set-up:
Hardware:
azerty Belgian period keyboard

settings:
Language setting: English
keyboard setting: Belgium

On this type of keyboard if you need numbers you have to use shift. This works but when using caps lock it doensn’t tis only effect the numbers and special chars. not for the normal letters there it works fine as it should.

This is tested on 2 laptops and both have the same problem so it isn’t a hardware problem.

 669 2018-01-072018-01-10Bug Report not trusted download using the usb tool Closedgrottem
100%
3.0 Task Description

after creating the bootable usb with the elive tool the img isn’t trusted and therefor can’t be installed or upgrade systems

 668 2018-01-062018-05-06Feature Request Office for old computers, not so bloated than LibreOffi ...Closednorman
100%
3.0 Task Description

Elive works well at older computers like Amilo M 7400, 512 MB RAM and about 1.2 GHz.

But Office solutions like LibreOffice too much bloated for old computers.

Because looking for Beginners using Elive (I think it’s perfect, because intuitive using is nearly perfect), giving a choose by using Elive, if old hardware is detected.
Beginners don’t know, that Abiword and gnumeric for example are good enough for the most office works.

And there are much less performance needing office solutions, i don’t know.

In germany we would say, thats the point of the letter “i”.
;)

 666 2018-01-032020-10-05Bug Report Numlock doesn't enable on boot Closedgrottem
100%
3.0 Task Description

While booting numlock doesn’t enable this could be handy for passwords

 664 2017-12-042018-01-03Bug Report hsqldb missing in LibreOffice base Closedgrottem
100%
3.0 Task Description

When creating a DB in libreOffice base you get loads of errors.

It can be helped by installing

sudo apt-get install libreoffice-sdbc-hsqldb

this maybe included in the next beta

 662 2017-11-302017-12-28Bug Report Timezone wrong Closedgrottem
100%
3.0 Task Description

With the 2.9.18 upgrade the timezone is off with 1 hour.

 660 2017-10-082017-10-26Bug Report Black screen  Closedpoleva
100%
3.0 Task Description

Hi,

I have yesterday finished installation of last beta version. Unfortunately I wasn’t front of my laptop when the installation process went to an end. I think that there’s probably on last step something like how to boot the system isn’t it? Now the system doesn’t boot and I can’t access bios... Have you some idea what to now? I’ m using Lenovo ThinkPad E530c.
Thanks.

BR,

Vlad.

 659 2017-08-262017-08-26Feature Request Backbutton in install Closedgrottem
100%
3.0 Task Description

a back button is needed in during the installation progress

 657 2017-06-202017-08-27Bug Report Not Booting - dm_raid45 not found Closedmartinwprior
100%
3.0 Task Description

PLEASE be describable, clear, and direct. Think that we need to understand, found, and solve the bug.

Remember to set the Due in Version box into the next stable version number.

Thank you

elive 2.9.2 USB I have tried this in a Pentium system and cannot fully boot an hangs with message: module dm_raid45 not found in modules.dep

I have also tried booting an Acer 5532. Same problem

 645 2015-01-152017-08-27Bug Report E resolution is fucked sometimes Closedthanatermesis
100%
3.0 Task Description

If you run something like “berusky” (small game, which don’t works in fact), it fucks your X resolution without possibility to recover it (BIG BAD BUG)

In short it seems like to: change your E resolution, don’t restore the original one, but E saves and remebers it

We should need a way to detect that the resolution was changed by FOO, when FOO finishes and some seconds passed change the resolution to the original one if we are not on it (not sure if this is possible)

Also, is needed to save the resolution on E confs only when we select to save it, seems like there’s a trigger that saves it automatically, this is very bad :P

Notes: betatest in e19 to see if the bug is solved (and so just cherry-pick the fixes)

 643 2014-12-262017-08-27Bug Report Most of .desktop doesn't respect XDG_DATA_DIRS Closedthanatermesis
100%
3.0 Task Description

XDG_DATA_DIRS defines the order to where to search for .desktop files, for example we have apulse-skype package that replaces a .desktop that is defined on a previous dir on this variable, this perfectly works if you run skype from menus (skype that requires pulseaudio using a pulseaudio emulator work in alsa-only), but if you run it from engage or from ibar, it doesn’t works (so looks like it gots the .desktop from the default dir instead of the one that we have defined), it doesnt works also from other places like “startup applications”

 642 2014-12-262017-08-27Bug Report E17 segfault when browsing the menu Closedthanatermesis
100%
3.0 Task Description

After to have opened the menu it frozen and then segfaulted, computer is a nettop, seems like nettops are much more prone to segfault since they are slower :)

 641 2014-12-172017-08-27Bug Report EXT4 mount problems in last versions Closedthanatermesis
100%
3.0 Task Description

I received these messages on IRC thanks to elmo40, but it doesn’t happens to me as you can see on this screenshot:

https://www.enlightenment.org/ss/e-549198d97b8fe3.16604264.jpg

Still having the problem ? How I can reproduce it ?

<elmo40> Thanatermesis: did you get the message ?
<elmo40> AlexAnt couldn't read his existing ext4 partition while trying the latest live image.
<elmo40> (2:37:54 PM) AlexAnteMachina: ext4 is an unknown filesystem to elive??? really???
<elmo40> (2:51:41 PM) AlexAnteMachina: thunar rejects to access my hdd
<Thanatermesis> elmo40, thx, ill check that
 640 2014-11-272017-08-27Bug Report E segfaults when pressing power button + keyboard keys Closedthanatermesis
100%
3.0 Task Description

If you press the power button (which shows a menu option in E to close computer) and extremely-fastly you press any keyboard key, you got a segfault

This can help making it to appear: cd /tmp ; mprime-cpu -t
Also if you add a “drop caches” on that command should help too, giving you more human-time over computer-time

<PrinceAMD> what i think is happening here is
<PrinceAMD> an object is deleted, then a key pressed on the object causes seff
<PrinceAMD> so i think some check is needed in _e_manager_cb_key_down
<PrinceAMD> i'm guessing this is a keybinding bug, so lets say the binding trigger a call of a deleted pointer,
Thread 1 (Thread 0xb5c619a0 (LWP 7261)):
#0  0xb7270607 in pause () at ../sysdeps/unix/syscall-template.S:82
No locals.
#1  0x0807ba9e in e_alert_show () at e_alert.c:38
No locals.
#2  0x08160903 in e_sigseg_act (x=11, info=0xbfe18b8c, data=0xbfe18c0c) at e_signals.c:71
No locals.
#3  <signal handler called>
No symbol table info available.
#4  0x00000020 in ?? ()
No symbol table info available.
#5  0x081479d9 in e_object_del (obj=0x9964768) at e_object.c:54
No locals.
#6  0x080808cf in _e_actions_act_halt_go (obj=0x9678cd8, params=0x0) at e_actions.c:2265
No locals.
#7  0x08089591 in e_bindings_key_down_event_handle (ctxt=E_BINDING_CONTEXT_MANAGER, obj=0x9678cd8, ev=0x996d9e8) at e_bindings.c:514
        act = 0x9894d78
        mod = E_BINDING_MODIFIER_NONE
        binding = 0x98cac98
        l = 0x98c9c80
#8  0x0813764c in _e_manager_cb_key_down (data=0x9678cd8, ev_type=50, ev=0x996d9e8) at e_manager.c:758
        man = 0x9678cd8
        e = 0x996d9e8
#9  0xb6f95c2f in _ecore_call_handler_cb (func=0x81375e8 <_e_manager_cb_key_down>, data=0x9678cd8, type=50, event=0x996d9e8) at lib/ecore/ecore_private.h:359
        r = 1 '\001'
#10 0xb6f96b6a in _ecore_event_call () at lib/ecore/ecore_events.c:562
        ret = 1 '\001'
        e = 0x9a8ca58
        handle_count = 2
        l = 0x0
        l_next = 0x0
        eh = 0x95e1df0
#11 0xb6fa1167 in _ecore_main_loop_iterate_internal (once_only=0) at lib/ecore/ecore_main.c:1942
        next_time = 0.24938403899795958
#12 0xb6f9f419 in ecore_main_loop_begin () at lib/ecore/ecore_main.c:983
No locals.
#13 0x08078164 in main (argc=1, argv=0xbfe1a284) at e_main.c:1138
        nostartup = 0 '\000'
        safe_mode = 0 '\000'
        after_restart = 1 '\001'
        waslocked = 0 '\000'
        t = 1417114627.236887
        tstart = 1417114627.236887
        s = 0x0
        buff = "1417114627.2\000\277{\267@\304z\267\001\000\000\000\000\020e\266\240\221", <incomplete sequence \341\277>
        action = {__sigaction_handler = {sa_handler = 0x8160988 <e_sigabrt_act>, sa_sigaction = 0x8160988 <e_sigabrt_act>}, sa_mask = {__val = {0 <repeats 32 times>}}, sa_flags = -1073741820, sa_restorer = 0xbfe18fd0}
        __FUNCTION__ = "main"
 636 2014-08-302017-08-26Bug Report windows moves to the first screen Closedthanatermesis
100%
3.0 Task Description

You said recently that you have found the cause of the bug where teh windwos are positioned in the first screen (xinerama) when looking at something else about borders?, but i still having the bug around, did you commited the fix ?

 634 2014-08-282014-08-28Bug Report Chromium problem with moving tabs Closedthanatermesis
100%
3.0 Task Description
I’ve noticed something with the tabs and windows in chromium that u might find interesting :)
Chromium ‘bugs’ with handling from one instance tab → window → another instance tab http://mwow.dk/data/action/vid/this-1-1.ogv

This bug happens since some update of chromium in debian wheezy, 35.0.1916.153-1~deb7u1, it works with the previous version 34.0.1847.116-1~deb7u1

 633 2014-08-222017-08-27Bug Report urxvt from thunar shows wrong colours Closedthanatermesis
100%
3.0 Task Description

If you open terminal from thunar, which is assigned to urxvt, the colors theme is not considered, it doesn’t read our .Xdefaults file ?

 632 2014-08-192014-09-26Bug Report Thunar @Folder > right click > create document freeze Closedlotd
100%
3.0 Task Description

OS: Elive Topaz+ (beta)
Arch: 32bit (x86)
update status: Fully up to date as per official elive repos.

how to reproduce:
Open a folder in Thunar, right click, point at create document = window manager freeze (Entrance?)

heres a video for demonstration:
External Link

 631 2014-08-092017-08-27Bug Report Audio card configurator happens twice Closedthanatermesis
100%
3.0
 630 2014-08-052017-08-06Bug Report gimp don't edit raw files Closedthanatermesis
100%
3.0
 628 2014-08-022017-08-27Bug Report Keyboard language is ignored if /etc/default/keyboard i ...Closedthanatermesis
100%
3.0
 627 2014-07-282017-08-26Bug Report Wrong language conf in wizard Closedthanatermesis
100%
3.0
 624 2014-07-042017-08-26Bug Report E17 crash playing with gadgets Closedthanatermesis
100%
3.0
 621 2014-06-262017-08-26Bug Report Kernel 3.14.7 and Vbox 4.3.12 ClosedPrinceAMD
100%
3.0
 620 2014-06-212017-08-25Bug Report Umounting in thunar fails Closedthanatermesis
100%
3.0
 619 2014-06-212017-08-27Bug Report audio-configurator smartness Closedthanatermesis
100%
3.0
 618 2014-06-202017-08-27Bug Report Suspend doesn't give you shared folders back Closedthanatermesis
100%
3.0
 616 2014-06-182017-08-27Bug Report Removing packages could lead to errors Closedthanatermesis
100%
3.0
 614 2014-04-212017-08-25Feature Request Menu in desktop must be in left button Closedthanatermesis
100%
3.0
 613 2014-04-102017-08-27Bug Report xrandr / e17 screens after play a game isn't restored Closedthanatermesis
100%
3.0
 612 2014-03-182017-08-27Bug Report Upgrade mode bugs Closedthanatermesis
100%
3.0
 609 2013-10-312013-10-31Bug Report Internet doesn't automatically connect to wifi Closedthanatermesis
100%
3.0
 607 2013-05-312017-08-26Bug Report e17 Menus Freezes after Wizard (not solved) Closedthanatermesis
100%
3.0
 606 2013-04-272017-08-27Bug Report black screen (console) in boot of live Closedthanatermesis
100%
3.0
 602 2013-02-272013-03-28Bug Report Google Talk video-conference Closedthanatermesis
100%
3.0
 601 2013-02-192017-07-01Feature Request VLC ugly subtitles Closedthanatermesis
100%
3.0
 600 2013-02-062014-10-31Bug Report sound card problem with intel models 3400 Closedthanatermesis
100%
3.0
 599 2013-01-282017-08-27Bug Report Flash for chromium Closedthanatermesis
100%
3.0
 598 2013-01-112017-08-27Bug Report smb-admin breaks smb.conf ClosedPrinceAMD
100%
3.0
 597 2012-09-082017-08-26Bug Report smb-browser requires smbfs which is not available right ...Closedthanatermesis
100%
3.0
 596 2012-09-072017-08-26Bug Report smb-usershare some warning messages Closedthanatermesis
100%
3.0
 586 2010-08-122017-08-27Bug Report Shared Folders: read-write not working Closedanabell
100%
3.0
 573 2010-04-082017-08-25Bug Report autolaunchers: disable when needed (gparted) Closedthanatermesis
100%
3.0
Showing tasks 1 - 50 of 92 Page 1 of 2

Available keyboard shortcuts

Tasklist

Task Details

Task Editing