|
262 | 2008-10-16 | 2017-08-25 | Feature Request | Wacom | Closed | thanatermesis | |
3.0 | |
Task Description
Made something nice to made working by default wacom devices in Elive
|
|
261 | 2008-10-15 | 2010-01-22 | Bug Report | Error when installing Elive since any version after Gem ... | Closed | Zord | |
2.0 | 1 |
Task Description
Can’t installing Elive on VMWare. The Eliveinstaller reports this:
Error Information:
An exit code of 1 was returned from sudo eliveinstaller.
Output Data:
There was no output
Error Logs:
There was no error message
It happens after I make the partitions, then I choose where goes Swap and where goes Root, and so Eliveinstaller crashes saving this in the log!
Thanks for the attention on this, I’m a truly fan of this distro.
PS: I’m submittin’ this again ‘cause I didn’t fill the left questionaire.
Cheers!
ZORD
|
|
260 | 2008-10-15 | 2008-10-15 | Bug Report | Error when installing Elive since 1.5 or 1.7 on VMware | Closed | Zord | |
| |
Task Description
Can’t installing Elive on VMWare. The Eliveinstaller reports this:
Error Information:
An exit code of 1 was returned from sudo eliveinstaller.
Output Data:
There was no output
Error Logs:
There was no error message
It happens after I make the partitions, then I choose where goes Swap and where goes Root, and so Eliveinstaller crashes saving this in the log!
Thanks for the attention on this, I’m a truly fan of this distro.
Cheers!
ZORD
|
|
259 | 2008-10-12 | 2009-03-12 | Feature Request | SAMBA system (Shared folders) | Closed | thanatermesis | |
2.0 | |
Task Description
Create a system of Shared folders using Samba
|
|
258 | 2008-10-12 | 2010-01-20 | Feature Request | If the computer is a laptop and no wifi is detected, as ... | Closed | assasukasse | |
2.0 | |
Task Description
It would be also nice to have a small gui for ndiswrapper, an ncurses one would be nice, so that user can find the inf file and install comfortably from a gui.
|
|
257 | 2008-10-11 | 2009-07-08 | Bug Report | Ralink RT2561 PCI wifi-card won't work with Elive 1.9.0 ... | Closed | AlexAnteMachina | |
2.0 | |
Task Description
My Ralink RT2561 PCI wifi-card worked “out-of-the-box” with LinuxMint 4.0 and 5.0. But even latest Elive dev 1.9.07 cannot handle it. Drivers are available here: http://www.ralinktech.com.tw/data/drivers/2008_0723_RT61_Linux_STA_v1.1.2.2.tar.bz2
Unfortunately I got no Idea how to deal with those files. Do I have to switch to LinuxMint for using it?
|
|
256 | 2008-10-11 | 2008-10-11 | Feature Request | iceweasel shouldnt have any website in history + fullsc ... | Closed | assasukasse | |
2.0 | |
Task Description
iceweasel shows some websites in memory when trying to write a website, it shouldnt have any sign of previous use. it would be also nice to have the fullscreen plugin available, on eeepc it works really nicely!
|
|
255 | 2008-10-11 | 2008-10-17 | Bug Report | elive should be localized in english as default NOT in ... | Closed | assasukasse | |
2.0 | |
Task Description
i noticed that the default way elive boots on eeepc is in spanish language!!! i think this is an error, it should boot in english!!
|
|
254 | 2008-10-11 | 2008-10-11 | Feature Request | default governor should be ondemand and not performance | Closed | assasukasse | |
2.0 | |
Task Description
I think the default governor should be ondemand instead of performance. in this way the user won’t be scared of the full power fan always running
|
|
253 | 2008-10-11 | 2008-12-03 | Bug Report | net-configurator doesnt put default values in netmask | Closed | assasukasse | |
2.0 | |
Task Description
net-configurator works good, but it should put default netmasks when an ip is entered. unfortunately i was unable to lease an ip from my ap using dhcp, either via exalt either via net-configurator.
|
|
252 | 2008-10-11 | 2008-10-14 | Bug Report | dhcp doesnt lease an ip on eeepc and 1.9.08 | Closed | assasukasse | |
2.0 | |
Task Description
I noticed that dhcp doesnt lease an ip when trying to connect to a wep AP either via exalt or via net-configurator. It is possible to connect via static ip.
|
|
251 | 2008-10-06 | 2010-01-20 | Bug Report | News in elive 1.9.07 | Closed | Juzz | |
2.0 | |
Task Description
When the install is finished and the update script has run - then it displays “News in elive”, but displays News for elive 1.9.02.
|
|
250 | 2008-10-06 | 2009-07-07 | Bug Report | No Bluetooth and No Temperature have same arguments | Closed | Juzz | |
| |
Task Description
I am making a syslinux.cfg for my USB stick, and I noticed that the arguments passed to the kernel are the same if you choose No Bluetooth or No Temperature.
|
|
249 | 2008-10-05 | 2009-07-07 | Bug Report | Radeon X1250 - auto detect not working | Closed | marko | |
| |
Task Description
HP 6715b notebook with radeon X1250 integrated graphics - fglxr driver. Auto mode reports failure, but x loads fine. Setting monitor to 1600×1280 shows no error message and x loads fine
|
|
248 | 2008-10-05 | 2009-07-08 | Bug Report | Radeon X125 | Closed | marko | |
| |
Task Description
HP 6715b notebook
|
|
247 | 2008-10-05 | 2009-07-08 | Bug Report | Broadcom BRM5787M ethernet does not work | Closed | marko | |
| |
Task Description
HP 6715b notebook NetLink BCM5787M Gigabit Ethernet PCI Express does not work. Works in Gem fine.
|
|
246 | 2008-10-05 | 2009-07-08 | Bug Report | cron jobs don't execute | Closed | marko | |
| |
Task Description
Cron jobs call /usr/sbin/anacron to execute tasks, but anacron is not installed as a default package
|
|
245 | 2008-10-01 | 2008-12-02 | Bug Report | nvidia old 96xx legacy drivers problem | Closed | yawlright | |
| |
Task Description
I am unable to get the live-cd mode to start the nvidia legacy 96xx driver/module. It fails after trying to unpack the 96xx kernel and uses the NV driver instead (meaning no 3d acceleration). 96xx is the correct version for my nvidia mx440 card and has worked perfectly in previously in past elive versions up to Gem. Unstable version 1.8.8 and the two previous unstable releases of them all had the same problem. Good slow burn at 8x speed and Md5 checked. not a particular release as it is exactly the same in those three 1.8.8 and below. Also an error box prompts at startup saying not all features have been started and recommends rebooting to try to get them working.
Installs fine, It installs the NV driver etc and when i try to switch to/install the 96xx after install I am not good enough at linux to get it working. It never starts x and pushes me to a login prompt.
During boot it even tells me there is an error and report it here.
|
|
244 | 2008-10-01 | 2009-07-07 | Bug Report | No Tigon3 module | Closed | quan2m | |
| |
Task Description
The Ethernet adapter in my secondary laptop is a Tigon3 chipset. I need this module to be able to use Ethernet.
The Dell D610 is one of the many laptops with an adapter that uses this driver.
|
|
243 | 2008-10-01 | 2010-01-20 | Bug Report | snd-hda-intel | Closed | DevCore | |
2.0 | |
Task Description
Elive 1.9.0.5 Kernel 2.6.25.16-elive-i686 Toshiba Sattelite L40 Sound doesn’t work
|
|
242 | 2008-10-01 | 2009-07-07 | Bug Report | snd_hda_intel | Closed | DevCore | |
| |
Task Description
Elive 1.9.0.5 Kernel 2.6.25.16-elive-i686 Thoshiba Sattelite L40 Sound doesn’t work
|
|
241 | 2008-09-29 | 2009-07-07 | Bug Report | Elive crashes on first startup | Closed | slashdot | |
| 1 |
Task Description
Warning: Undefined variable $ext in /home/elivebugs/bugs.elivecd.org/plugins/dokuwiki/inc/confutils.php on line 24
Warning: Undefined variable $ext in /home/elivebugs/bugs.elivecd.org/plugins/dokuwiki/inc/confutils.php on line 24
Elive doesn’t start on my PC. The image shows my computer screen booting from the Live CD. I think this is a bigger error, because Ubuntu showed me a similiar error code. Everytime I start the PC it shows me that screen, then I have to reboot and the second time it boots normally. Here’s the image: //img87.imageshack.us/my.php
|
|
240 | 2008-09-28 | 2008-11-14 | Bug Report | Wlan Intel PRO/Intel 3945ABG (802.11a/b/g) | Closed | n4a | |
| |
Task Description
hi, My Intel PRO/Intel 3945ABG (802.11a/b/g) wlan card works in all distributions fine (including debain). i have tested now Elive 1.7.7 & Elive 1.9.02. i can find the network and if i try to connect i can also find the access point but i can´t enter the wlan.
engine[Lenovo 3000 N100]
|
|
239 | 2008-09-24 | 2008-09-24 | Bug Report | AMSN doesn't recognize eeepc camera | Closed | assasukasse | |
| |
Task Description
AMSN doesn’t detect the eeepc camera even if it is working correctly.
|
|
238 | 2008-09-23 | 2008-10-14 | Bug Report | Exalt doesn't perform correctly on eeepc | Closed | assasukasse | |
2.0 | |
Task Description
When using elive on an eeepc exalt doesn’t work correctly:
|
|
237 | 2008-09-22 | 2008-10-13 | Bug Report | gmplayer doesn't launch | Closed | thanatermesis | |
2.0 | | |
|
236 | 2008-09-21 | 2008-10-14 | Bug Report | eeepc hotkeys doesn't work correctly in 1.9.01 | Closed | assasukasse | |
2.0 | | |
|
235 | 2008-09-20 | 2010-03-02 | Bug Report | Crappy icons that needs to be overhauled... | Closed | assasukasse | |
2.0 | | |
|
234 | 2008-09-20 | 2009-07-07 | Feature Request | a user and group GUI manager is absolutely needed | Closed | assasukasse | |
2.0 | | |
|
233 | 2008-09-18 | 2009-05-25 | Bug Report | gdebi doesn't install anything | Closed | assasukasse | |
2.0 | | |
|
232 | 2008-09-16 | 2008-09-17 | Bug Report | Thunar thumbnailer doesn't show raw images. | Closed | assasukasse | |
| | |
|
231 | 2008-09-14 | 2009-03-29 | Bug Report | Wrong keyboard layout in xorg.conf when changing to "es ... | Closed | meborc | |
| 2 | |
|
230 | 2008-09-12 | 2008-09-13 | Bug Report | Probleme avec EXALT sur 1.8.8 ! | Closed | bernard | |
| | |
|
229 | 2008-09-07 | 2010-01-20 | Bug Report | Problema al montar hd externo | Closed | Pacma | |
2.0 | 1 | |
|
228 | 2008-09-02 | 2008-09-11 | Bug Report | elive 1.8.7 on eeepc | Closed | assasukasse | |
| | |
|
227 | 2008-09-02 | 2008-09-11 | Bug Report | elive 1.8.7 on eeepc | Closed | assasukasse | |
| | |
|
226 | 2008-09-01 | 2008-09-11 | Bug Report | Fallos continuados de elightenment | Closed | Pacma | |
| | |
|
225 | 2008-08-29 | 2008-09-11 | Bug Report | Al actualizar se pierde la red | Closed | Pacma | |
| | |
|
224 | 2008-08-27 | 2008-10-14 | Bug Report | no wireless wicd not working | Closed | harky | |
| | |
|
223 | 2008-08-24 | 2008-09-11 | Bug Report | 1.8.5 eeepc version has several bugs | Closed | assasukasse | |
| | |
|
222 | 2008-08-22 | 2008-09-11 | Bug Report | 1.8.4 eeepc becames unresponsive after several wifi los ... | Closed | assasukasse | |
| | |
|
221 | 2008-08-22 | 2008-09-25 | Bug Report | Elive 1.8.4 on eeepc | Closed | assasukasse | |
| | |
|
220 | 2008-08-17 | 2008-11-02 | Bug Report | USB Mouse 1.8.2 | Closed | Jump N Mustang | |
| | |
|
219 | 2008-08-13 | 2008-09-11 | Bug Report | No ejecucion de synaptic y gparted | Closed | Pacma | |
| | |
|
218 | 2008-08-13 | 2008-09-11 | Bug Report | eeepc problems in 1.8.2 | Closed | assasukasse | |
| | |
|
217 | 2008-08-10 | 2009-07-07 | Bug Report | Problem with the visualization internet pages | Closed | bertolo75 | |
| | |
|
216 | 2008-07-13 | 2008-09-11 | Bug Report | Brasero doesn't eject cd or dvd after burning and gives ... | Closed | assasukasse | |
| | |
|
215 | 2008-07-13 | 2010-01-20 | Bug Report | User-admin shows in menues but is not in elive | Closed | assasukasse | |
2.0 | | |
|
214 | 2008-07-12 | 2008-07-12 | Bug Report | X11vnc doesn't start with elpanel | Closed | assasukasse | |
| | |
|
213 | 2008-07-12 | 2009-07-07 | Bug Report | problem with hibernating PC on elive1.7.2 | Closed | The_Ice | |
| | |