Elive

Cuando voy a montar el hdd externo me dice fallo al montaje por formato ntfs, uso el hdd elements lo comparto en windows y en linux.

No wifi drivers for eeepc 1008ha.
The driver can be found for ubuntu 9.04.
Cheers.

I think this shoul be nice feature and maybe easy to do.. Add this feature to possiblities settings of feature - for example to have watch all the time above the windows or volume or others often needed..

Can’t installing Elive on VMWare. The Eliveinstaller reports this:

Error Information:
	An exit code of 1 was returned from sudo eliveinstaller.

Output Data:
	There was no output

Error Logs:
	There was no error message

It happens after I make the partitions, then I choose where goes Swap and where goes Root, and so Eliveinstaller crashes saving this in the log!

Thanks for the attention on this, I’m a truly fan of this distro.

PS: I’m submittin’ this again ‘cause I didn’t fill the left questionaire.

Cheers!

ZORD

In the latest compiz dev release (1.9.42 unstable compiz) I can’t enter a static IP. It always reverts back to dhcp when I try to apply the proper address.

There is wrong coding for Czech language... So exept of our “special” letters I see only boxes.. Af for letter with apostrofs ond other pronunciation marks..

I`m running 1.9.56 development Version on my Laptop with a X1300 Mobility radeon.
Compiz works under Ubuntu 9.10 out of the box. I use there the OSS ati driver.

On Elive there seems to be a bug with the included ati driver. I’ve tried several Notebooks with ATI graphic cards. None of them worked.
On every machine I’ve got the following message:

$> ecomorph 
ecomorph (core) - Fatal: No GLXFBConfig for default depth, this isn't going to work.
ecomorph (core) - Error: Failed to manage screen: 0
ecomorph (core) - Fatal: No manageable screens found on display :0.0

a compiz-check shows, that everything should be ok:

$> compiz-check 

Gathering information about your system...

 Distribution:          Debian GNU/Linux (5.0.3)
 Desktop environment:   Unknown
 Graphics chip:         ATI Technologies Inc M52 [Mobility Radeon X1300]
 Driver in use:         radeon
 Rendering method:      AIGLX

Checking if it's possible to run Compiz on your system...

 Checking for texture_from_pixmap...               [ OK ]
 Checking for non power of two support...          [ OK ]
 Checking for composite extension...               [ OK ]
 Checking for FBConfig...                          [ OK ]
 Checking for hardware/setup problems...           [ OK ]

To manualy compile the driver won’t work. It aborts.

regards
Dragan

The CPU speed stand still low even after plugging power cord to adapter and the speed doesn’t grow up to full or to medium possibility. Still low power-saved mode. I have installed advanced power management, powertweak and gnome power management-the new one feature.

Net-connetor
Al arrancar produce violación de segmento.
En ultima actualización a día de 22/01/2010

Buenas tardes, el siguiente error es:
Cuando en un pc de mesa o un portátil se le añade un usb wifi, el pc lo detecta y lo monta pero a la hora de usar el net-connecto se vuelve loco y hace exploración cada segundo con lo cual no te deja ni elegir una red ni poder para la exploraciones de redes, con lo cual lo hace inservible.
Las pruebas fueron realizadas con un usb-wifi Wisacom.
P.D. En los portátiles con wifi integrada no tenemos este problema y el funcionamiento es correcto

Hi!

In 1.9.57 net-connector is not usable due to a segmentation fault!

Thanks

alex

Hello,
a problem for elive 1.9.56 and earlier versions up from about 1.9.30: (where older versions did not have this problem, but i don’t know exactly)

description:
the startup elive sound is much too loud (almost breaking the speakers)

on Lenovo R61i (and probably other laptops of this brand)
on DELL Latitude C540 (and also other laptops of this brand)

i found a workaround:
after selection of language you add nosound to the command line options
then the sound will be just audible but not annoy your neighbourhood.

on other computers like Apple MacMini or Samsung the sound level is ok.

on Apple iMac elive does not sound at all.

Buenas noches, este bug es significativo desde e punto de vista de un usuario de nivel administrador pero a nivel de usuario no administrador es importante.
Empecemos, el administrador instala una impresora usb al pc portátil etc y la programa y la deja lista para que el usuario la use, aquí es cuando esta este pequeño fallo cuando el usuario sin conocimiento de la clave de root quiere imprimir algo enciende la impreso ya previamente instalada y sorpresa salta la autoconfiguracion de la impresora ya instalada pidiendo de nuevo la clave root que no sabe el usuario, el usuario puede imprimir lo que quiera pero se le quedara la dichosa ventana e incomoda de pedir la clave de root que el no posee.
La question:
Si ya tenemos una impresora instalada cuando esa dicha impresora la conectamos de nuevo porque salta la autoconfiguracion?

Hello,
can u use scons 1.2
because the 1.0 it’s too old, and i can’t instlal application, and install scons is difficult :
i can do it!

Version 1.9.58 emodule places crashes totally e17.
Unable to use Elive.

Greetings:
Agust

PLEASE be describable, clear, and direct. Think that we need to understand, found, and solve the bug.

Remember to set the Due in Version box into the next stable version number.

Thank you
In devel.version 1.9.58 and 1.9.59 - live mode - several programs cannot be started. Examples are synaptic and gparted

System: elive 1.9.57
Language: English
Keyboard: US

If root password [and possibly user passwd] is set during HD install with “$” as the first character, elive appears to accept the password. Once the system is installed ‘esu’ and terminal commands like ‘su’ fail to accept the password.

This works perfectly on every other Distro I’ve ever used, so I think it must be specific to the elive installer.

Also, once the system is installed, attempting to change the password using the GUI user manager attempting to set a password beginning with “$” fails with the message “The passwords are not equals, please try again”.

It appears to accept other non-alphanumeric characters. It only fails with “$”

The best solution would be for the password setting to work correctly with “$” as the first character in the passwd.

A less professional but at least acceptable alternative would be to generate an error telling the user not to start a password with “$”. This would be a useful workaround but might appear as a shortcoming relative to other distributions.

When graphical system crashes and a box with “Enlightenment SEGV’d” message shows up, this box is displayed in the centre of a screen with resolution set while booting up.
If resolution was changed after loading graphical system, this box shows out of the centre of current screen as if it matched centre of a sceen of resolution set at boot up. If resolution was changed a lot, part (or possibly whole) of this box is displayed out of visible screen and thus it’s hard to find out what actions are possible to recover from this situation.

... and probably other windows, although they are correctly displayed in menu.

Elive 1.9.60

Rectangles mark places where those characters should be displayed.

After dist-upgrade yesterday (1.9.60) and restarted, module places disappeared from system. Whats’ wrong?

When installing elive 1.9.39 from the live cd creating a boot partition, the installer stops with an error stating that there is not enough free space on the hd.
i used a 60gb hd entirely dedicated to elive.
40 mb /boot (reiserfs)
3.5 gb / (reiserfs)
56.5 gb /home (xfs)

any thoughts?

Running on a Dell Optiplex 320, 4Gb Ram, ATI Vid -Running Live CD

Video and audio hardware detected correctly.
Opening screen (Desktop) should have not only clock but also the current date somewhere.
Ice Weasel browser handles multimedia well. I have noticed odd behavior browsing on Piratebay.org, after loading initial page, subsequent ones, after clicking navigation controls on bottom of page, refuse to load???
Need to have an email client (s/b able to be configured & tested on live CD)
-Outstanding distro. Keep up the excellent work. Looking forward to next version.

JR_2

PLEASE be describable, clear, and direct. Think that we need to understand, found, and solve the bug.

Remember to set the Due in Version box into the next stable version number.

Thank you

Hello, I tried to play with flash player to install it in chrome, found some solutin with dynamic link of libraries, but it worked only in terminal admin su manual run of chrome.. After “tweaking” I’m not able to run flash in opera, iceweasel also :( The report is something like:
ERROR: .... adobe-flashplugin/libflashplayer.so : /usr/local/lib/libnss3.so : version “NSS_3.11” not found (required by /usr/lib/adobe-flashplugin/libflashplayer.so)

the same with native_library_linux.cc

I know I’ve upgraded somewhere something and I think it did the installer of flash directly from adobe, but what now?
Thank U

Is there any GUI interface WORKING how to setup behavior of touchpad? DELL D620, D600.. is not possible to use with touchpad, only with joypad - touchpad toooooo slow.. I know about Xorg.conf “tuning” but didn’t work.. And about setup the touchpad to work as a scroll ?

The system recognized well the charging but when discharging it gives the warning message about critical low battery few seconds before system totally collapse cause no power - about 20 sec... So, where to set it to another value? The measurement of the battery status shows about 30% when there is nothing left.. I have new high-capacity battery so there is no probability about non-linear electricity discharging..