Elive

ID Opened Last Edited  desc Task Type Summary Status Opened by Progress Due In Version
7642023-08-082023-08-08Bug ReportFails to open folders - GUI, Retro in BoxesUnconfirmedsscorpio
0%
Task Description

From the dock (shortcuts), and click-screen menu, clicking to open folders/directory crashes the whole system back to the login screen. Logs in fine, then repeats when attempted. Besides terminal, I have not been able to successfully open it. It is fully updated, which had to be done in terminal as the software centre would not execute “Restart & Upgrade” after the download.
I am running Retro in Gnome-Boxes before going to metal. Everything else has seemed to be working as expected.

7592022-01-312023-07-30Bug ReportAfter auto-upgrading, 'elive-browser-on-ram' does not c...Unconfirmedtriantares
0%
Task Description

This is on 3.8.20 Buster based installation.

After a reboot, Elive updates and ….. offers to run browser from RAM. As the machine is low on RAM, I opt ‘cancel’ but the script runs anyway. There’s no way to cancel other than NOT selecting a browser to alter.

When starting from the commandline the script does quit immediately using the zenity ‘cancel’ button.

 763 2023-02-112023-07-30Bug Report Download problems Closedivanpedro1960
100%
Task Description

Problems after download.
Once the download is done, it seems the ISO just holds 15 k of files, hence it is impossible to install anything.
Donation.
Yesterday I made s mall donation, however, today, if I want to try to make a correct download again, it asks for a donation once more. Please, explain.

 753 2020-08-212023-04-11Bug Report software center opens with a error warning. Closed1Track
100%
4.0 Task Description

When I open software center I get a error warning say (something went wrong sorry). And also when theres updates the same software center says (Failed to install file: not supported). Not a programmer so hope someone can figure what is going on I noticed there is a newer version of gnome software center available but I don,t know how to install manually. Wish it could be in the software center repository somehow.

7622022-09-112022-09-11Bug Reportintel wifiUnconfirmedeshep
0%
Task Description

[issue]
Boot normal via either kernel, wireless card (intel 9260) not detected. Card appears in lspci but is not detected during boot.

[fix]
Boot with `intel_iommu` enabled.

7612022-02-092022-02-09Bug ReportAuto hibernate featureNewthanatermesis
0%
Task Description

In the stable version the computer automatically suspend / hibernate on low battery, I think we don’t have this feature in new versions of Elive since we don’t use e17 here, so implement this feature, using:

/etc/laptop-mode/conf.d/auto-hibernate.conf

TODO:
* use elive-pm tool
* feature elive-pm to create a temporal swap file if there’s no swap partition
* auto-detect we are not using the E17 (or other) feature
* what if we are in live mode?
* what if battery doesn’t works (dead battery, wrong number, or always to 0)

7602022-02-012022-02-01Bug ReportPalemoon should be installed from external repoResearchingthanatermesis
0%
4.0 Task Description

Just like google chrome, palemoon should be installed from an external repo mode, this will avoid having outdated versions lying out with the want to downgrade too

 757 2021-08-152021-08-30Bug Report Cant login using github ClosedTheTechRoboCantLogin
100%
Task Description

Which is annoying

 758 2021-08-152021-08-15Bug Report Elive Screenshot notification blocks top-right ClosedTheTechRoboCantLogin
100%
Task Description

My suggestion: If user has received a notification 3 times, They doN’t get one anymore

7562021-03-292021-03-29Feature RequestPower management configuratorNewthanatermesis
0%
4.0 Task Description

Elive needs a power management configurator for things like:

- behaviour for LID, autodetect also if the HD is mechanic in order to tell the user the dangers of keep runing the computer with the lid closed using those disks
- cpu speeds
- others?

 755 2021-01-282021-02-01Bug Report   Closedkoli
100%
Task Description


7542020-12-082020-12-20Bug Reportelive-multiscreens | "Screen settings" not starting pro...UnconfirmedChrisPHL
0%
Task Description

I’ve just installed Elive 3.0.6 on an old Mac Mini (Core2Duo).
Since I want to make use of it as a media center, I connected to my TV. Because of the TV’s overscan function I cannot see the edges of the screen. :-/ When trying to start “Screen settings” I get two dialogs before nothing further happens:
1st:
Information
Use the next tool to configure your screens. If you want that Elive use it when starting the system you need to save the configuration.

There’s just an OK button, I click it:

2nd:
Question
You don’t have saved any configuration, so Elive cannot use it to remember your screens setup. Do you want to try again? You need to select the option to ‘Save As’ and type a desired name in the default location.

I can click No|Yes but whatever I do that’s it. No Screen setup window pops up.

When I manually start “Screen settings” from command line using “elive-multiscreens” I get the following python stack trace after clicking OK on the first dialog:

File "/usr/bin/arandr", line 42, in <module>
  main()
File "/usr/lib/python2.7/dist-packages/screenlayout/gui.py", line 318, in main
  force_version=options.force_version
File "/usr/lib/python2.7/dist-packages/screenlayout/gui.py", line 159, in __init__
  self.filetemplate = self.widget.load_from_x()
File "/usr/lib/python2.7/dist-packages/screenlayout/widget.py", line 93, in load_from_x
  self._xrandr.load_from_x()
File "/usr/lib/python2.7/dist-packages/screenlayout/xrandr.py", line 150, in load_from_x
  o.modes.append(Size(int(a) for a in d.strip().split(" ")[0].split("x")))
File "/usr/lib/python2.7/dist-packages/screenlayout/auxiliary.py", line 53, in __new__
  arg = tuple(arg)
File "/usr/lib/python2.7/dist-packages/screenlayout/xrandr.py", line 150, in <genexpr>
  o.modes.append(Size(int(a) for a in d.strip().split(" ")[0].split("x")))

ValueError: invalid literal for int() with base 10: ‘1080i’

I’m able to circumvent the error by exchanging line 150 of with these lines:

              try:
                  o.modes.append(Size(int(a) for a in d.strip().split(" ")[0].split("x")))
              except ValueError as e:
                  print("Error on parsing screen sizes.", e)

After that the “Screen Layout Editor” opens and shows my display configuration.
Unfortunately there’s no easy way to just circumvent the TV’s overscan.

Please let me know if you need any further information on that issue.

 688 2018-05-202020-10-21Bug Report Utilidad de discos no abre el disco montado Closedxampu
100%
3.x (beta's) Task Description

Al ingresar a la utilidad de discos, se puede ver sin problema el disco duro y sus particiones. Pero a la hora de dar clic en “Montar”, se monta aparentemente en una ruta pero dicha ruta no existe. En otras palabras si monto el disco desde la utilidad de discos, el disco supuestamente se monta pero no se puede acceder a él desde la ruta que muestra en pantalla.

Ahora si ingreso al administrador de archivos, ahi se puede ver las particiones del disco y se puede acceder. Pero si doy a montar en la utilidad de discos, curiosamente se desmonta en el administrador de archivos. Ahí está el error.

Y este error ya lo he visto en versiones anteriores, pero en esta última sigue ese mismo problema. Y el error se presenta en cualquier maquina que se quiera probar el elivecd.

Saludos y larga vida a Elivecd, el mejor sistema basado en Debian !!!!!!!

 720 2018-08-282020-10-21Bug Report Network adapters not recognized Closedbushy
100%
Task Description

I booted Live Mode on a Lenovo 110s ideapad laptop using a USB created with Etcher. Everything seems to work well with the exception of my wireless network adapter, it’s not recognized: Intel Dual Band Wireless-AC 3165 Plus Bluetooth.



Hope you can make it work.

 722 2018-09-102020-10-21Feature Request Not graphical installtion Closedstoppy98
100%
2 Task Description

It’d be great a non graphical installtion like debian’s one, so that older hardware with low memory (under 512mb) will be able to install the os without needing to swap and, possibly, taking less than a hour.

 725 2018-10-302020-10-21Bug Report HotSpot wifi Closedconny
100%
Task Description

Unable to setup mode=AP in network config, there is no choose for hotspot in network applet, just ad-hoc and infrastructure.
Atheros driver is with master mode enabled, AP possible, but no luck.. Wired LAN with DHCP, wifi no sharing.
Asus eee 1005

 726 2018-12-072020-10-21Bug Report Grub Closedpeg23
100%
Task Description

Greet you! I have some problem with grub of eLive. It cannot display other systems except for eLive. I have ElementaryOS Juno and Linuxt Mint 19.

Thanks,
Peter

 736 2020-01-032020-10-21Bug Report Lost options during install on 3.8.3 Closedfrancois.cauneau
100%
Task Description

Installing 3.8.2 beta as permanent on a PNY 32 GB USB key plugged in a dell Latitude 630, everything went fine except the following : every choices on packages to be kept on disk (themes, softwares…) were discarded, resulting in a minimal install (2 themes, 1 language…)

 740 2020-01-302020-10-21Bug Report Unable to launch gnome-control-center ClosedTaraxacum
100%
Task Description

~
~»> gnome-control-center 1

Command ‘gnome-control-center’ not found, but can be installed with:

Loading new broadcom-sta-6.30.223.271 DKMS files… Building for 5.2.0-0.bpo.2-amd64
Building initial module for 5.2.0-0.bpo.2-amd64
Error! Bad return status for module build on kernel: 5.2.0-0.bpo.2-amd64 (x86_64)
Consult /var/lib/dkms/broadcom-sta/6.30.223.271/build/make.log for more information.
dpkg: error processing package broadcom-sta-dkms (–configure):
installed broadcom-sta-dkms package post-installation script subprocess returned error exit status 10
Setting up gnome-control-center-data (1:3.30.3-2~deb10u1) … Processing triggers for desktop-file-utils (0.23-4) … Processing triggers for mime-support (3.62) … Processing triggers for hicolor-icon-theme (0.17-2) … Processing triggers for libglib2.0-0:i386 (2.58.3-2+deb10u2) … Processing triggers for libglib2.0-0:amd64 (2.58.3-2+deb10u2) … Processing triggers for libc-bin (2.28-10) … Processing triggers for man-db (2.8.5-2) … Setting up gnome-control-center (1:3.30.3-2~deb10u1) … Errors were encountered while processing:
broadcom-sta-dkms
E: Sub-process /usr/bin/dpkg returned an error code (1)

~»> gnome-control-center 127
**
ERROR:../shell/cc-shell-model.c:458:cc_shell_model_set_panel_visibility: assertion failed: (valid)
[1] 27807 abort gnome-control-center

Please help.
Thank you.

 741 2020-01-302020-10-21Bug Report Beta 64: When I close the lid on my laptop, it freezes  ...ClosedTaraxacum
100%
Task Description

I have just installed E16 64 bits on my Acer laptop, and when I close the lid, the whole system freezes and I have to do a forced shutdown to start it up again.
It does not go into hibernation, it only freezes. I have trouble starting the pc up after hibernation as well.

Thank you for an otherwise great and very pretty OS.

 748 2020-03-232020-10-21Bug Report Does not recognize wifi hardware Closedcardenizen
100%
Task Description

Lenovo ideapad 130S-14IGM
Product number: 81KU000FUS
Bios version: 9HCN26WW

Attempt to boot from usb created with UsbWriter-1.3 from elive_3.0.6_stable_usb.img fails with
1) does not recognize wifi hardware:

Manufacturer: Realtek Semiconductor Corp.
Description: Realtek 8821CE Wireless LAN 802.11ac PCI-E NIC
Driver version: 2024.0.9.101

2) Cursor does not respond to touchpad or enter key at select country screen

 751 2020-06-122020-10-21Bug Report 64 bit OS install problems Closeddarkness
100%
Task Description

Hello, Team
I have a Lenovo x201i laptop ( CPU Core i3 + 8GB RAM)
Firstly , i use 32bit latest version OS - very nice
but it can see only 3GB RAM and i decided install 64Bit system
i download latest beta version , write it on USB-stick and tryed
boot… before, i turn off security password to HDD acssess on BIOS
Boot starting and i see a menu ( a few options booting 64 bit system)
but if i tryed anything- after a few second leptop rebooting…

 752 2020-07-202020-10-21Bug Report Cannot apply updates to 3.8.12 beta ClosedJRG
100%
Task Description

I tried to update my 3.8.12 64-bit beta installation with the 14 updates in “Software 3.30.6”. That fails.

[I do not appear to be able to upload an image file and hence cannot paste the screen snapshot I took.]

The message (in a semi-transparent overlay window) indicated:

Unable to download updates:
E: http://repo.buster.elive.elivecd.org buster/main amd64 smb-admin amd64 3.8.14+git43bbo34df-6buster1 is not (yet) available )Something wicked happened resolving ‘repo.buster.elive.elivecd.org:http’ (-5 - No address associated with hostname))

“OK” I said to myself, “I should be able to download the 3.8.14 64-bit beta ISO and re-install.” That I do not seem to be able to do without coughing up more money for the download.

 99 2007-05-132020-10-05Bug Report The Clock in Elive ( Time ) always wrong! ClosedFreeEagle
100%
1 Task Description

Hi,

This is a Bug!!!! try to fix this issue in the Clock, whatever i do to set the time of the Clock in Elive, it get after a new start again wrong.

FreeEagle

 354 2009-02-232020-10-05Bug Report ADSL and PPPOE Configuration does not work ClosedFreeEagle
100%
2.0 Task Description

ADSL and PPPOE Configuration does not work. it crashed all the time.

Please FIX this Peoblem.

 666 2018-01-032020-10-05Bug Report Numlock doesn't enable on boot Closedgrottem
100%
3.0
 678 2018-02-262020-10-05Bug Report Add support VGA chipset:Intel corporation haswell-ULT I ...Closedduffy.duck
100%
4.0
 576 2010-04-272020-10-05Bug Report net-connector: Stop to SCAN networks if we are connecte ...Closedthanatermesis
100%
3.01
 746 2020-03-102020-09-29Bug Report First boot cannot suspend / hibernate / (shutdown?) cor ...Closedthanatermesis
100%
4.0
 742 2020-02-012020-06-26Betatesting Make Eltrans work again Closedstoppy98
100%
4.02
 750 2020-06-062020-06-06Bug Report E16 "user configurator" does not call "gksu" Closedtriantares
100%
 749 2020-05-232020-05-23Bug Report mplayer failed to play login sound Closedlutin11
100%
 745 2020-03-042020-04-09Bug Report Odd state of OS ClosedTheTechRobo
100%
1
 747 2020-03-122020-03-28Bug Report No wifi support Closednitrosnfr
100%
 744 2020-02-232020-02-23Bug Report find command error in /usr/bin/elive-health ClosedJack-Holborn
100%
 743 2020-02-062020-02-21Bug Report Gdebi-gtk unable to install .deb files Closedstoppy98
100%
3.x (beta's)
 739 2020-01-222020-02-02Betatesting No puedo descargar actualizaciones - versión beta 3.8.2 ...Closedjaume
100%
3.x (beta's)1
 714 2018-08-162020-02-01Bug Report Primary monitor setting, not saved  Closedjfbourdeau
100%
 713 2018-08-092020-02-01Bug Report emodule-places dont show SD cards Closedthanatermesis
100%
4.0
 709 2018-07-162020-02-01Bug Report Can't remove Autologin for a user using the GUI Closedjfbourdeau
100%
 679 2018-02-282020-02-01Bug Report live mode not detecting mouse ow wifi adaptor  Closeddg_w
100%
4.0
 691 2018-06-012020-02-01Bug Report Booted from usb tographical problems - after install I  ...ClosedLeib.Michael
100%
 686 2018-05-062020-02-01Bug Report Can't change theme w/o crashing desktop unless switchin ...ClosedLarryDC
100%
 719 2018-08-192020-02-01Bug Report Language problem : improperly applied to the interface ...Closedjfbourdeau
100%
 716 2018-08-162020-02-01Bug Report Chrome, OPera, Firefox all have problems with Amazon Pr ...Closedjfbourdeau
100%
 667 2018-01-062020-02-01Feature Request More performance at old computers, Video from HD/SD, Yo ...Closednorman
100%
 654 2017-03-152020-02-01Feature Request UEFI boot mode request Closedconspacer
100%
4.0
 690 2018-05-282020-02-01Bug Report Elive Beta boots to black screen  Closedjayaura
100%
3.x (beta's)
 721 2018-09-102020-02-01Bug Report Old, unsupported graphics Closedstoppy98
100%
3.x (beta's)1
 696 2018-06-182020-02-01Bug Report Elive Will Not Boot after Passcode is Entered Closedlacyrice2
100%
Showing tasks 1 - 50 of 755 Page 1 of 16

Available keyboard shortcuts

Tasklist

Task Details

Task Editing