Elive

Hello!

I would like to ask you if you can in the next stable version add the Arabic Keyboard Layout, this will be very helpful to users that want to write in Arabic like me. Beside there is alot of the users that use Arabic, this is an advantage to Elive.

Best Regards,
FreeEagle

Hi all,

We can reduce the Boot time of Elive by disabling the wifi(Wlan)of the PC at the boot time ( Start time ) and enable it again when Elive enter the Desktop mode. Enabling WiFi will make the PC look for the last connected WLan before shutting down the PC and imagine that you are went back from the University to Home ( This means from Uni. Network to your Private Home Network ) In this case The PC will keep searching for the old Network try to connect itself to it, which will never find, and this will cost us just time in the boot Phase. Beside under Elive i find that we need a simple Programme to be added which can handle very simply Networks (WLAN) through the elpanel like small icon added to the Panel and with simple click enable the use to scan and then directly to connect the Pc to the desired Network.So such a Programme is a really need under Elive.

My best wishes
FreeEagle

Error Information:

An exit code of 1 was returned from gmplayer

Output Data:

MPlayer dev-SVN-rUNKNOWN-4.1.2 (C) 2000-2007 MPlayer Team
CPU: Genuine Intel(R) CPU           T1350  @ 1.86GHz (Family: 6, Model: 14, Stepping: 8)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
xscreensaver_disable: xscreensaver wid=12582944.

Exiting... (Quit)

Error Logs:

Can't open joystick device /dev/input/js0: No such file or directory
Can't init input joystick
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

I get this message whenever i close Mplayer. For your Information i use Aspire laptop without Joystick, just my Laptop and a USB Mouse. The same happen also when i use my Desktop, both have no Joysticks.

FreeEagle

Hi!

I can’t visit some Web pages because they support just IE or Firefox, although ICEWEASEL is the same Firefox, but there sever can not recognized ICEWEASEL as Firefox, and thus can’t visit these webpages.

FreeEagle

Hi,

This is a Bug!!!! try to fix this issue in the Clock, whatever i do to set the time of the Clock in Elive, it get after a new start again wrong.

FreeEagle

Could do not add animated Wallpapers and themes from this site

http://www1.get-e.org/Themes/E17/

FreeEagle

Hi ,

I get this message every time in the boot window, and then it gives me this:

please read /user/share/powernowd/README.Debian

Any Ideas ?

FreeEagle

Hi ,

Can’t we go back to thunar?it was better integrated in Elive than PCMan.

Regards,
FreeEagle

Hello!

Can you please add VLC to the ELive library. It is a great Software to watch Online (TV) Streaming in the next Elive version. Such a Programme miss Elive.

Best Regards,
FreeEagle

Hi!

I tried after installing the last version of Elive
elive-codename: Revolution rl2+
elive-version: 0.6.8
date-builded: 2007-04-30
debian-version: etch
stable-release: no

to update the System apt-get update && apt-get install e16, everything went well, except that Internet work very Slow under E16.I use WLAN .

FreeEagle

Please try hardly not to remove E16 from the next version of Elive, it is really simple, lite and very attractive to the Newbies. I like to much and really happy to have it so well configured under Elive. Its little buggy than E17.

FreeEagle

Hello!

I saw that Elive miss this Programme which is very important to be used in Universities here in Germany, Student can get connected to Internet just by using this Client.It is provided under Debian, but with GUI for KDE and for command line, but the version under Debian Packages is too old, there is many other new versions which work better than the one under Debian.
Please watch this http://www.unix-ag.uni-kl.de/~massar/vpnc/ it will be a very good step to add this client under Elive, and ofcourse with GUI.

I love to see find it in the next stable version

Best Regards,
FreeEagle

Please try to complete the Mime under Elive, its not finished.

FreeEagle

There is some files that are ziped but are protected with passwords, the concerned programme under Elive can not recognize that automatically, i should first start the Archievmanager manually then put the password in the field to be able to unzip the file, but i know it is possible to make this automatically but just one click, ( Unzip ) then the Programme gives a field this just in case that the File are protected with password to enter.

FreeEagle

I tried to maximaized the Window of Synaptic but it looks that it has a bug, try to fix it.

FreeEagle

AUtmatic Update manager, its a really need for Elive. I would like to see it in the next versions.

Users do not know when they should do Update, especially New users.

FreeEagle

Hi!

After updating my System today, i get this message whenever i started my Scite it says:

Scite has a BUG, do not save your files in UFT-8 codification or use a better editor like vim! :)

you do not need UTF-codification if you do not use accents or other special charts than used on “simple plain English”

Best Regards,
FreeEagle

Hi,

I recognized this Error message on the boot.When i start the PC, i get this on the boot screen.

mount: accourding to mtab sysfs is already mounted on /sys Fault

Regards,
FreeEagle

Hi ,

i get always this message on the boot :

FATALERROR: i8xx-tco(/lib/modules/.....)

I wish that you can check this please.

FreeEagle

Hi there,

I wated yesterday to watch the World Trade Center Movie by using my Elive the development Version, the DVD Luncher works, but neither Mplayer nor Gxine could start the DVD, it can’t read the DVD, always give faults.In the gxine it gives ( Null ) when i brows to the DVD instead of showing its name.

FreeEagle

Hi !

I asked many times before to add the VPNC to Elive, but what is good to have the last VPNC, simply because it is much more better than the included version to Elive now.

See this site for more information about the current version of VPNC:

http://www.unix-ag.uni-kl.de/~massar/vpnc/

Best Regards,
FreeEagle

Hi there!

Can you please add this driver to Elive in the next version. I have this Sound card:
Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)

It works under Elive, but i am not able to control it well :

Simple Example:

When i insert the Jack of the Mic the speakers of the Laptop keep on, whatever i did , then are all the time active.

When i try to mute the sound from Sound Mixer then i can not get sound through the MIC ( Both the Mic and the Speakers are muted ).

The next version of Mandriva solved this Problem. As i installed the Cooker version on my Laptop, i was able to control the sound correctly. You can have a look to there next version and fix this under Elive.

Thanks alot in advance,
FreeEagle

Hi !

after a new install of Elive Gem 1.0 on my Laptop, i had this Problem again. Elive does not show the time and Date correctly again.

I Updated the whole system but the Problem Still exist, then i tried to use tzconfig to solve it but even when i choose the correct time Zone it keeps showing the wrong time, another thing i did is to use the UTC timezone but then it shows me the correct time but a wrong Date.

BTW. I have only ELive on my System and there is no Windows on it

I use Aspire Laptop : Model 5550 from Acer.

Best Regards,
FreeEagle

Hi there!

I installed today Elive Gem on my PC, everthing worked well, even my Linksys USB Wifi, were recognized and worked smoothly, but after updating the system online through apt-get, i get some Problems:

1. The System does not shutdown. It reach the line the System will shutdown now and then keep at this point without doing anything.
2. My Syslink USB Wireless-G adapter, is not anymore recognized under Elive. When try to list the Lan cards with ifconfig or through elive Panel, it show me just my eth0 and IEEE but no eth1 which it is my first Wifi USB adapter. I have another Wifi card, which is built in the system, but it does not work with Elive.

So please try to fix this Problem urgently to be able to surf the Net.

Best Regards,
FreeEagle

For any further information i am ready to help

Hi !

in GEM 1.0 the stable version, i have this Problem. It started as i did the update.

I can not get the full screen mode when i play any video clip in youtube . I get just a small window in the left corner of my Screen, and the normal screen of youtube keeps running.

Best Regards,
FreeEagle