Elive

If unetbootin is selected, there’s no a language set, if is the case, popup a dialog asking for a language

What does if you dont press anything in the boot menu ? (maybe keyboard not working?), is the variable set to english or to nothing ? (Note: there’s a part in the boot that sets english if there’s not anything set)

Hibernate/suspend features are not stable in some computers, maybe the hibernate* tool in elive should ask/warning about this before to do it

if the user select the “static” mode, the entry’s should be writed automatically with the actual ip variables (the ones done by dhcp or the actual used)

At least with the “vmware player” bundle script, thunar looks like to want to open with the wrong application (mplayer), do some kind of launcher for it, with terminal and etc...

a

The spaces on the ESSID is not fully supported, on some pieces of the interface (list of essid’s and status) are only show the first word, the good point is that it does connect correctly here (essid is “scg & volcanica”), but the status looks like are not correctly showed (like it not connected).

This is a minor-preference bug

After to upgrade net-connector im unable to use it (daemon not running aparently), the daemon doesn’t want to start (init.d) because there’s teh file /var/run/net-connectord.pid existing, if this doesn’t do any problem, i will recommend to remove it at every “stop” action of the daemon (+ kill/close any possible daemon running), maybe also at every “start” of the daemon ? so i dont think that there will be a problem to restart the daemon (connection doesn’t drops, if im not wrong)

Thanks to the report of DronAn[BY], aparently the connect and disconnect buttons has dissapeared, there’s a few screenshots:

http://bayimg.com/BaDfkaAcf http://bayimg.com/BADFnAacF

The reason of this is the russian language that screws something somewhere... there’s an error message found in the terminal:

UnicodeDecodeError: 'ascii' codec can't decode byte 0xd0 in position 0: ordinal not in range(128)

I don’t know the reason of why this affects the button and no other parts of the interface (see screenshot), but for now, since this is a very important bug (some ppl will not connect!), i have just disabled from gettext the message that broke this :) (note: the broking thing is not the button message but other element, please see the commit in this ticket comments)

Could be nice and not very hard to implement an automatic tracer reporter, this means, a kind of pre-launcher for the interface (bash that calls the python code) with waiting error trace messages, if there’s these messages, they will be send to... somewhere, in some way

What you think ?

Sometimes the drivers give us a strange name (actually this practice was drop a lot by drivers developers), but there’s at least 2 that i know that are for a specific purposes, like vboxnet* that is for virtualbox related networks (not useful at all to have it on netconnector), and pan* that means Personal Area Network, so for bluetooth devices, not useful at all in netconnector too, i recommend to just ignore these 2 devices (maybe include a variable where to list all the ignorable devices in the header of the code?) from netconnector since they are not useful/needed, but also making NC buggy (in a sort of way)

This bug is reported by Pacma, but in order to resolv it i recommend a different way to manage the default profile (wired):

Aparently if you have the default and the X profile configuration, if you select the X one and then try to connect, NC automatically changes to the default one making it impossible to autoconnect to the X profile.

I think that instead of the actual method of work, we should only permit one (and only one) autoconnect profile (not needed to be the “default” one), so there’s no possible to have 2 autoconnect profiles coexisting, if the user try this, a question message will appear asking if want to replace the autoconnect “previous” profile and use this one instead.

postinstall of kernel-image should call grub-aggregator from nurse

<PrinceAMD> Thanatermesis, <Elive_user25_en> If one choose swedish as language in textmode boot.
<PrinceAMD> <Elive_user25_en> Everything is translated into...
<PrinceAMD> <Elive_user25_en> finnish.
<PrinceAMD> <Elive_user25_en> that has not one word in common with swedish

Looks like when the partition label has a space, blocks e17

Before to run the mount function, check if gparted/fdisk/cfdisk/* is running in order to avoid problems

If we are already connected to internet is useless to scan about networks, disable the scan until we are disconnected (the non-stop scanning thing makes that some wireless drivers blocks and a reboot is required to recover the connection)

some error messages when you run smb-usershare are shown in the terminal, but not graphically, this can be a problem when the user is running the application from graphical mode only (menu applications launchers).

In my case, just repackaging it for the new version i found these messages:

Lacking to install the “samba” package:

net usershare: cannot open usershare directory /var/lib/samba/usershares. Error No existe el fichero o el directorio
Please ask your system administrator to enable user sharing.
Traceback (most recent call last):
  File "/usr/bin/smb-usershare", line 580, in <module>
    gui.msgbox(START_MSG)
TypeError: msgbox() takes exactly 3 arguments (2 given)

Lacking to add the user to “samba” (sudo adduser me sambashare), i comment the exact parameter because maybe is a good idea to request the root password via “gksu” tool to do it for the user

net usershare: cannot open usershare directory /var/lib/samba/usershares. Error Permiso denegado
You do not have permission to create a usershare. Ask your administrator to grant you permissions to create a share.
Traceback (most recent call last):
  File "/usr/bin/smb-usershare", line 580, in <module>
    gui.msgbox(START_MSG)
TypeError: msgbox() takes exactly 3 arguments (2 given)

Chromium complains about outdated flash version, like in www.electroswing-radio.com , there’s some bugs reported in debian (bts show chromium), so we need to wait the release of debian first to see what happens with this

This workaround in needed for these models 3400

root $ echo “options snd_hda_intel model=auto” » /etc/modprobe.d/alsa-base.conf ; rmmod snd_hda_intel ; modprobe snd_hda_intel

By default if you play a DVD and enable subtitles in VLC, they looks ugly as 2 hells, I think that this can be solved in the settings (advanced/all?), we need to play / beta-test a bit to see a solution for that

If you put the laptop to suspend, when you put it back you cannot browse shared folders, this happens on my acer-aspire-one laptop in live mode at least

Maybe there’s a post-suspend hook/script that needs to be added for reload sambasomething ?

Kill tumblerd always before umounting a partition

~ ps aux | grep 30017
1000 1868 0.0 0.0 5188 732 pts/0 SN+ 17:35 0:00 grep 30017
1000 30017 4.5 3.4 517740 68508 ? Sl 17:12 1:02 /usr/lib/i386-linux-gnu/tumbler-1/tumblerd
~

Try to reproduce:

- /etc/default/keyboard is set to “es” - configure E to use US instead
- when you restart e17 is set back to ES

Note: use a new elive install, which sets correctly all those things

There’s multiple packages on gimp for edit raw files, we need to know which one to include (betatesting)

I received these messages on IRC thanks to elmo40, but it doesn’t happens to me as you can see on this screenshot:

https://www.enlightenment.org/ss/e-549198d97b8fe3.16604264.jpg

Still having the problem ? How I can reproduce it ?

<elmo40> Thanatermesis: did you get the message ?
<elmo40> AlexAnt couldn't read his existing ext4 partition while trying the latest live image.
<elmo40> (2:37:54 PM) AlexAnteMachina: ext4 is an unknown filesystem to elive??? really???
<elmo40> (2:51:41 PM) AlexAnteMachina: thunar rejects to access my hdd
<Thanatermesis> elmo40, thx, ill check that