Elive

Hi,

I recognized this Error message on the boot.When i start the PC, i get this on the boot screen.

mount: accourding to mtab sysfs is already mounted on /sys Fault

Regards,
FreeEagle

Hi ,

i get always this message on the boot :

FATALERROR: i8xx-tco(/lib/modules/.....)

I wish that you can check this please.

FreeEagle

Hi there,

I wated yesterday to watch the World Trade Center Movie by using my Elive the development Version, the DVD Luncher works, but neither Mplayer nor Gxine could start the DVD, it can’t read the DVD, always give faults.In the gxine it gives ( Null ) when i brows to the DVD instead of showing its name.

FreeEagle

Hi !

I asked many times before to add the VPNC to Elive, but what is good to have the last VPNC, simply because it is much more better than the included version to Elive now.

See this site for more information about the current version of VPNC:

http://www.unix-ag.uni-kl.de/~massar/vpnc/

Best Regards,
FreeEagle

Hi there!

Can you please add this driver to Elive in the next version. I have this Sound card:
Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)

It works under Elive, but i am not able to control it well :

Simple Example:

When i insert the Jack of the Mic the speakers of the Laptop keep on, whatever i did , then are all the time active.

When i try to mute the sound from Sound Mixer then i can not get sound through the MIC ( Both the Mic and the Speakers are muted ).

The next version of Mandriva solved this Problem. As i installed the Cooker version on my Laptop, i was able to control the sound correctly. You can have a look to there next version and fix this under Elive.

Thanks alot in advance,
FreeEagle

Hi !

after a new install of Elive Gem 1.0 on my Laptop, i had this Problem again. Elive does not show the time and Date correctly again.

I Updated the whole system but the Problem Still exist, then i tried to use tzconfig to solve it but even when i choose the correct time Zone it keeps showing the wrong time, another thing i did is to use the UTC timezone but then it shows me the correct time but a wrong Date.

BTW. I have only ELive on my System and there is no Windows on it

I use Aspire Laptop : Model 5550 from Acer.

Best Regards,
FreeEagle

Hi there!

I installed today Elive Gem on my PC, everthing worked well, even my Linksys USB Wifi, were recognized and worked smoothly, but after updating the system online through apt-get, i get some Problems:

1. The System does not shutdown. It reach the line the System will shutdown now and then keep at this point without doing anything.
2. My Syslink USB Wireless-G adapter, is not anymore recognized under Elive. When try to list the Lan cards with ifconfig or through elive Panel, it show me just my eth0 and IEEE but no eth1 which it is my first Wifi USB adapter. I have another Wifi card, which is built in the system, but it does not work with Elive.

So please try to fix this Problem urgently to be able to surf the Net.

Best Regards,
FreeEagle

For any further information i am ready to help

Hi !

in GEM 1.0 the stable version, i have this Problem. It started as i did the update.

I can not get the full screen mode when i play any video clip in youtube . I get just a small window in the left corner of my Screen, and the normal screen of youtube keeps running.

Best Regards,
FreeEagle

Hi!

since the last update of Iceaweasel , it does not work fast as before, especially when i try to run it for the first time. There is some issues happened since the last update.

Best Regards,

FreeEagle

Hi!

The auto luncher in GEM does not work. Whenever i insert a new empty CD to burn it, the auto luncher started and asks about if it should start the burner Program to start burning, and when i confirm the task, it did nothing ( do not start the Burner Program automatically ) so i have to do it myself.

FreeEagle

Hi!

i tried to do apt-get dist-upgrade to upgrade my Wlan-Firmware but i get always this message:

Update held back ... ( in German update zurückgehalten ) and i do not know why?

FreeEagle

I installed the Elive_1.9.23_unstable and after installing nvidia-settings and started it in the Superuser mode. I had a wierd thing. It changed the default Keyboard from German to English and could not restore it again to German.

Regards,
FreeEagle

Elive_1.9.23_unstable

Whenever i want to move from normal mode to Full screen mode in Youtube the PC start to work slow and the Clip of Youtube start to work slow ( Just the Video ) but the Audio keeps running well.

Please fix this Problem

I have to say this happened under Compiz!

Regards,
FreeEagle

Whenever i want to install Elive, i have to install a certain Module in order to be able to install Elive on my Hard disk. Is there any Solution for this Problem????

And if i do not have any Internet connection because of the Bug in ADSL and PPPOE Configuration, then there is no any Chance to install Elive on my HDD.

Regards,
FreeEagle

Please add this Resolution to Elive :

1920×1080

Best Regards,
FreeEagle

Hi!

Can you please add this Driver of this Printer to Elive, it is a great Printer. The Link of the Driver is:

http://software.canon-europe.com/software/0031118.asp?model=

There is a simple instruction how to add this Driver and the Printer to Debian, but it did not work for me well, i had to start cups whenever i want to print out somthing, and under the superuser mode. This is the Link for it :

http://www.nicht-spurlos.de/linux/canon-lbp-3010-unter-linux-installieren/

Thank you very much.

Best Regards,
FreeEagle

Hi!

Would you please add this Resolution to Elive:

1920×1080 , this should be directly recognized by start of Elive.

Thank you very much

FreeEagle

Hi!

I noticed yesterday when i tried after 2 hours of working on Elive (last Dev. Version elive_1.9.37_unstable) to restart my X-server, that the x-server restarts, but it keeps can’t loging in in my system again, and show me just the Black Screen. I have Nvidia Graphic Card, i user the Nvidia Driver shipped with Elive, but not the last one ( the one with Graphic Card up to 512M RAM) my Graphic Card is Nvidia FX 5200 AGP, and the resolution of my Monitor is 1920×1080 Full HD , Viewsonic Flat screen. I had at last to restart my system by pressing at one Ctrl-alt- del combination to restart the estem, because the system did not want to give me anyone of the other console modes to login and do anything. By the way, i added my xorg.conf to add my resolution manually. thats all what i did. Please repare this Problem.

Best Regards,
FreeEagle

Hi!

When i click on Audacious, the mouse pointer jump to the left high corner of the screen automatically, please fix this Problem.

FreeEagle

I have burned a few .iso of Elive Topaz 2.0 (stable) 001 that have passed the MD5-Checksum comparison and that I have burned at slow speeds to ensure no errors. Every time I boot the CD I get stuck at this error “mdadm: No arrays found in config file or automatically” Where it waits for 7 minutes before finally performing the rest of the boot process. This has happened both on a Latitude D630 and Latitude E6400.

Install using LVM gives the error message: “/dev/VolGroup00/LogVol06 is mounted; will not make a filesystem here!”

Created 11 lvm logical volumes thru Sabayon 5 install with LogVol06 as spare partition of 10.gb. Tried to select LogVol06 as / and got the above error message. Tried twice with ext4 and ext3.

Hp desktop, Amd x2, 3gb ram. Elive 1.9.51, Separate /boot partition of 10 gb. Logical volumes /home /usr /opt /var /tmp.

Hope this can get resolved , Love Elive. Best wishes Murray

Hi there,

1st I cannot set the Due in Version box into the next stable version number.

So anyway- This is a freshly purchased, fully installed Topaz from 1st April 2013, running on a IBM T42 1.7 ghz P4 Pentium M processor with 1gig ram.

System runs great except - It fails to shutdown correctly at every option available.

Message reads ‘Killing remaining processes’ and just hangs.

It is marked as Critical severity, due to the fact I am crashing heads on hard power off, although that may not be critical as far as you are concerned, this is my last ide laptop drive of 250gig and I don’t want it toasted.

Thank you

en livecd, o en la version instalada, (0.6.7) la webcam Bus 005 Device 003: ID 0ac8:305b Z-Star Microelectronics Corp. no funciona, es reconocida y la imagen sale en negro, en debian etch con el gspca-modules para su nucleo funciona, pero con el nucleo de elive no :/ eso es todo :D

i have a problem with shares-admin-manager, when i run this program for directory shared , the app freeze.

The system freeze when configure in the menu panel the key binding settings.