Elive

Could do not add animated Wallpapers and themes from this site

http://www1.get-e.org/Themes/E17/

FreeEagle

I tried to maximaized the Window of Synaptic but it looks that it has a bug, try to fix it.

FreeEagle

Hi all,

Whenever my PC boot i get this message :

nit: Switching to runlevel: 6
Got disconnected from the system message bus
Can’t open system message bus connection: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory terminating...

FreeEagle

The PCMCIA ports are not loaded or unaccessible. It won’t read any card.

Powernowd hangs at boot for approx 10 minutes while booting in VMWare.

Confirmed on Hardware as well, intel and amd of via, intel, and nvidia sli chipsets.

Occurs in latest release candidate.

Installer hangs on ‘rmmod floppy’, after selecting gparted as the partioner

Floppy drive is not connected

3997 ? Ss 0:00 \_ /bin/bash /usr/sbin/eliveinstaller
4063 ? D 0:00 \_ rmmod floppy

installer updated on 20070602

at the login : the password given for the user is not accepted
roger126@sympatico.ca

To print anything I can select in Abiword my printer. But nothing happens. From all other applications (browser, xpdf), the prints are ok. On the other hand to create a pdf file with Abiword is also ok.

iceweasel crashes about every 1-1 1/2 hours

Cdparanoia has a known issue (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=391901) with SATA drives when ripping CD’s. Grip using it’s own internal cdparanoia code and also the cdparanoia binary freezes the entire system when ripping starts.

I think there’s a patch available but not sure if it’s implemented. Grip would also occasionally freeze teh system using cdda2wav ripper too although not every time.

I’ve installed Elive on an old Compaq P3 @700 Mhz, with more than 128Mb of memory.
The problem is that running as another user than root doesn’t allow the access to the elpanel.

The problem happened as soon as installed was completed, when I logged in with the user created during installation.
The ‘fine tune’ step seems to start, however I’m not able to confirm it does anything, neither if it ends after a while.

When trying to access an option in the elpanel, I get the prompt for the root account password.
If I enter a wrong password, the windows pops up again requesting the password.
If I enter the right password, the windows closes, but nothing happens.

I tried to login as root, and I have full access to the panel (even if I loose all my icons and bars).
I’ve tried to delete and create new users, but it still doesn’t work.

I’m quite a noob in Linux, but I don’t think I made a mistake (in fact I followed the installation step by step).
My drive is a 10Gb, split in one main partition of 7.5Gb for the system, and a 2.5Gb Linux-swap.
I’ve used the reiserfs format as suggested.

Please if I missed anything just tell me ^^
Thanks in advance for your suggestions.

I am not able to compile things such as vmware server or the cisco vpn client against the running kernel despite having kernel headers and/or source installed and linked.

I just installed Elive stable and when I reboot and try to login, Elive tells me that my password is incorrect (I tryed it a lot of times, included in failsafe mode)

My system has a TDK 48/14/48D USB CD-Burner, which I have used to burn all of my Linux distros, then subsequently boot and install from them in the same drive.

Not so with Elive 1.0 GEM! By the way, I checked the Checksum and it matched.

When I boot from this CD in this drive, I see two lines at the top of the screen:
Unknown keyword in the config file
Unknown keyword in the config file

Then I can select ‘English’ and ‘Default’, after which I can go no further than this screen:

Loading, please wait..... 
[: missing] 
[: missing] 
Unifing: base ls: /DSSCD/cdrom/xserver/: No such file or directory 
ls: /DSSCD/cdrom/deliver/: No such file or directory 
overall 
Something wrong with the image mounting 
BusyBox v1.1.3 (Debian 1:1.1.3-4) Built-in shell (ash) 
Enter 'help' for a list of built-in commands 
/bin/sh: can't access tty: job control turned off 
(initramfs) 

....and nothing else happens :(

I have sent a copy of lsmod.txt to Thanatermesis

Thanks!

Hi I can’t use my wireless Edimax card as the shipped rt61 driver won’t work so i have to instead use this:

http://rt2x00.serialmonkey.com/rt61-cvs-daily.tar.gz

BUT it won’t compile in elive. the make command doesnt work even with headers and source installed. can someone please help.

I know i need to use this driver as i’ve used it before. the MAKE worked in ubuntu and fedora and was simple to get my edimax card working.

i’ve uninstalled the rt61 generic driver from elive ready to install this specific legacy one, can someone please give advice, i’m sure it’s just cos some symlinks are wrong or something.

terminal output:

root@EliveCanvas[/home/jonah/Desktop/rt61-cvs-2007100406/Module]# make
make: * /lib/modules/2.6.18-elive/build: No such file or directory. Stop.
rt61.ko failed to build!
make: * [module] Error 1

This is the second time i experience the following problem:
if i set powersave governor, and leave the pc on overnight
the next morning the mouse pointer has disappeared
everything works, but i have no mouse pointer.
i have to open a terminal as root and reboot in order to regain control of the system.
This happens only with powersave governor or userspace fixed at the lowest speed (600 over 1300)

Hi all!
I’ve try to capture whit kino, but give me this error:

WARNING: raw1394 kernel module not loaded or faliure to read/write /dev/raw1394!

what can i do?
thanx!!!

Package “linux-image-2.6.18-elive” does not contain the module bcm43xx for broadcom 43xx wifi cards.
The directory exists in the module path, but it is empty.

PrinceAMD, i have seen this also happen in my laptop, some module file does not exist!

Hi !

in GEM 1.0 the stable version, i have this Problem. It started as i did the update.

I can not get the full screen mode when i play any video clip in youtube . I get just a small window in the left corner of my Screen, and the normal screen of youtube keeps running.

Best Regards,
FreeEagle

Hi!

i tried to do apt-get dist-upgrade to upgrade my Wlan-Firmware but i get always this message:

Update held back ... ( in German update zurückgehalten ) and i do not know why?

FreeEagle

My intel card GM965 x3100 don’t run ok. It’s a strange resolution.
The 3D acelerated it’s ok.

Hi,
after installing 1.7.2, i create user and login. All works fine, but after some time i can run on application, enligthenment return an error code without output, and can’t log back with my user account, if i try entrance will come back after trying to login. Only root work.
After some reboots i can login back with my user.

**CD/DVD image is valid. Tried diffent brands of CD/DVD still doesn't work.

My system is an IBM Lenovo Intel Core Duo CPU @2.33GHz with 2GB of ram.

When attempting to install elive 1.0 gem I get the below error. 

Loading, please wait.....

[: missing] 
[: missing] 
Unifing: base ls: /DSSCD/cdrom/xserver/: No such file or directory 
ls: /DSSCD/cdrom/deliver/: No such file or directory 
overall 
Something wrong with the image mounting 
BusyBox v1.1.3 (Debian 1:1.1.3-4) Built-in shell (ash) 
Enter 'help' for a list of built-in commands 
/bin/sh: can't access tty: job control turned off 
(initramfs)**

Boot Disk Error when attempting to boot from ELIVE CD-R. I downloaded the ISO file to a CD-R, set boot mode in BIOS to CD ONLY and I get “BOOT DISK ERROR. PLEASE INSERT SYSTEM DISK AND PRESS ENTER”. Tried putting it on one of my hard drives. Same problem. Any ideas my friends? I am running a home built machine with an ASUS M2N32-SLI deluxe motherboard and updated BIOS.

Used LiveCd for 1.7.7 dev.,but numerous problems. One no support for English (US), just UK, even though Portugal and Brazil get their own language settings. Also, when I tried to load the graphical system, I get the error (EE) no devices detected. Also, the CD did not detect my wireless card, Cisco MPI350, and forced me to use the Ndiswrapper option. Nice music though.