Elive

When there’s 2 wireless interfaces listed in NC, when you select one of them, NC comes back to the other one

Note: looks like there’s also a problem related with the scanning, like too much fast scannings etc
Note: somebody has reported me that if you put your password and between you are doing this the list is scanned (updated), your password is removed

Version 1.9.32 updated last week with ‘aptitude update && aptitude safe-upgrade && aptitude dist-upgrade’

After returning from ibernate there is no more sound.

‘lspci’ shows the card :
05:00.0 Multimedia audio controller: Creative Labs SB Audigy LS

The enlightenment-sound-gadget disappeared too.
Tellme what you need to investigate.

After upgrade to new version ( did burning new version, booting and upgrading/installing )
all programs I had installed has been deleted.

Don’t know if you think this is a bug, but for me would be very important, once I suited a system
with hours and hours spent for installing what needed and configuring, tricking to make programs
reacts as I would, have all this job vanished for a normal, upgrade

3G-dialer still not working for Italy with H3G
Have to use wvdial but connection often falls
MVP

When waking up from Suspend the screen brightness seems to be at the lowest - I have to use the function keys to turn up the brightness.

This is on a HP Pavilion DV6000.

Installing Crossover Linux (both Pro and Games) from CodeWeavers causes either enlightenment or Xorg to hang or crash.

When the install is finishing up Xorg/enlightenment freezes, mouse can be moved, but nothing happens - and I am unable to change to another desktop using CTRL + ALT + arrow key

The same thing happens when trying to install applications or managing bottles. Though sometimes I get an error message that enlightenment has SEGV’ed with the options to Recover or Quit.

I think it might be when Crossover tries to generate menu links for the application, but I am not entirely sure.

I am sorry to say that this used to work under Ubuntu/enlightenment.

You can download a trial of Crossover Games here:
http://www.codeweavers.com/products/cxgames/download_trial/

(This is important for gamers - hence the severity)

Volume setting at starting of Elive 1.9.50 is set to maximum. So it’s really no pleasant to hear too loud long wav to be impossible to set silent cause of no possibility to set it down till it ends.. So better is to set it to half the volume for start..

There is wrong coding for Czech language... So exept of our “special” letters I see only boxes.. Af for letter with apostrofs ond other pronunciation marks..

After reading posts from users I tried change all the possibilities, but with no luck..

Section “InputDevice”

Identifier	"Generic Keyboard"
Driver		"kbd"
Option          "CoreKeyboard"
Option		"XkbRules"	"xorg"
Option		"XkbModel"	"pc105"
Option		"XkbLayout"	"us,cz"

Option          "XkbOption"     "grp:altshifttoggle"

Does not work even with alt_shift_toggle

But in console setx keyboard to us or cz works..

Version 1.9.32 updated three weeks ago with ‘aptitude update && aptitude safe-upgrade && aptitude dist-upgrade’

I have since two days no more sound. No more enlightenment-sound-gadget, nothing
with alsamixer. The only way is to give as root ‘alsa reload’. So sound came back, but
alsamixer continue to display no channels.
Tried to reconfigure sound with elivepanel, with ‘audiomanager’, with ‘audio-configurator’ but nothing change. Just ‘alsa reload’

Hi,

my System:
Notebook Asus G1s, Dualcore Intel 7500 - 2,2GHz, 4GB Ram, Nvidia m8600GT, running on a second Monitor.
OS:
Elive 1.51 Dev - lang=de

The Bugs:

1. Keyboard - Live works fine in German with QWERTZ Keyboard. The installed System is in German but the Keyboard falls back to QWERTY. If I change it with Elpanel QWERTZ works only for the actual Session, after Log-Off or Reboot the Keyboard is falling back to QWERTY and didn’t save my settings. There is one Error Message while changing:
Die Konfigurationsdatei /etc/default/console-setup spezifiziert eine Tastaturbelegung und -variante, die von dem Konfigurationsprogramm nicht unterstützt wird. Deshalb werden keine Fragen über die Tastaturbelegung gestellt und Ihre gegenwärtige Konfiguration wird erhalten.

2.
a) The System freeze while trying Themes and changing them for a few times. I have to break the session with ctrl alt f1/f2.
b) or if its not freezing there comes an Error Message like: enlightment is crashing, recover or exit.

Thx and LG
Posbi

i have installed elive 1.9.51 on a acer aspire one A150L but i can’t write any symbol like @,# and any other symbol that needs ALT GR. the keyboard is italian and it’s well configured.

a strange thing is that i can write them only in the command launcher (alt+esc). in any other applications they don’t work.

Install using LVM gives the error message: “/dev/VolGroup00/LogVol06 is mounted; will not make a filesystem here!”

Created 11 lvm logical volumes thru Sabayon 5 install with LogVol06 as spare partition of 10.gb. Tried to select LogVol06 as / and got the above error message. Tried twice with ext4 and ext3.

Hp desktop, Amd x2, 3gb ram. Elive 1.9.51, Separate /boot partition of 10 gb. Logical volumes /home /usr /opt /var /tmp.

Hope this can get resolved , Love Elive. Best wishes Murray

1.9.42 compiz live cd cant boot up, the machine get frizzed with this error msg on screen:

Network device wlan0 detected, DHCP broadcasting for ip. [ 40.783723] Kernel panic - not syncing: HwthreeWire() CmdReg: 0XFF RE|WE bits are not clear!!
[40.783727]

I have to say that on 1.0 this realtek (RTL-8185) pci wifi board didnt work (the system did not recognized it), but livecd have been loaded ok, the instalation was ok, and the system was full working
On 1.9.50 / 51 the wifiboard works perfectly

livecd 1.9.51
The live cd bootups, i choosed nvidia 173...driver (recomended by the system), resolution 1280×1024, but no way, the screen is shown on 640×480, after taht i tried with al the drivers avaliable on the elivecd without luck.

Opcions Panel > screen > screen resolution: shows only avaliable 640×480

xorg.conf shows

Section “Device”

Identifier	"Configured Video Device"
Driver		"nvidia"

EndSection

Section “Monitor”

Identifier	"Configured Monitor"

EndSection

Section “Screen”

Identifier	"Default Screen"
Monitor		"Configured Monitor"
SubSection	"Display"
	Modes    "1280x1024"
EndSubSection
      DefaultDepth	24

EndSection

Section “Extensions”

 Option       "RANDR"     "enable"
 Option       "RENDER"    "enable"
 Option       "Composite" "enable"

EndSection

Section “dri”

      Mode 0666

EndSection

The same thing happened with a FX7200

I have dual booted a HP paviliion dv7-2170us with dev version 1.9.5 [i think] of elive & vista. it is x64 architecture. These are the bugs that I am finding:

[1] unrecognized file system when rebooting into vista; this doesn’t always happen though, so I wondered if it had anything to do with selecting full ntfs support when I installed. I reinstalled using the read only but unmounted by default option which has not corrected it.

[2] soundcard only plays through subwoofer speakers at bottom of device, leaving the primary speakers unused; this results in a horrible sound.

[3] no 3d, but I haven’t spent much time trying to fix this yet, but it is an ATI radeon HD 4650 with 1024 MB video RAM, so it would be nice to utilise it.

I am using suspend when I am not using my gateway computer. When I brought it back up, the sound was not working.

setings are saying use yahoo, but i found http://www.weather.com/ codes from url do a trick, they work

yahoo already uses something different, so no use from new url code:
http://weather.yahoo.com/lithuania/kaunas-county/kaunas-475457/ http://img149.imageshack.us/img149/3248/forecast.jpg

as example, Kaunas - Lithuania: at
http://www.weather.com/outlook/travel/businesstraveler/local/LHXX0002?lswe=kaunas&from=searchbox_localwx

i took from it “LHXX0002” and thats exactly what i needet ;]
http://img340.imageshack.us/img340/2971/forecast1.jpg

Elive 1.9.5.1 - Asus G1s, 4GB ram, nvidia 8600gt-m, HD 160gb

Elive is running on sda1 30gb, swap is sda2 6gb, sda3 is 110gb datastore.
I’ve erased 60gb from sda3 to get more free space. Than I tried to copy 80gb Musicfiles(flac, ogg, mp3)from an ext hd to sda3. After copying near 30gb the prozess stopped with an errormessage: no more free space. I ereased everything on sda3 but after that the same result. Than I took GParted to try another filesystem (fat32). Gparted did his job but as I started Thunar, the Manager shows me that there are still all files on sda3 and no more free space. Gparted shows a free sda3.
A check under windows shows, Gparted is right, sda3 is free. Copying 80gb musicfiles to sda3 works also fine.

So there’s a prob with Filemanagment, Thunar or cache.

LG
Posbi

Hi

Just wondering if there is a way to get elive to access a wireless network using Protected EAP (PEAP) as WPA authentication.

I have installed FreeRadius from synaptic but don’t know how to configure it.

After upgrading from 1.9.51 to 1.9.52 the Screenresolution was set too high.
-I’ve used the Upgrade-Elive tool.
-I tried changing the resoultion back to 1280×1024 by using both: The tool provided in Elpanel “xconfigurator” and also the Enlightenment Configuration.

-Elpanel’s Tool xconfigurator seems to be doing nothing.
-Enlightenment Configuration returned an Errormessage, telling X-Server is missing XRandR.

The Keyboard setting qwertz is still falling back to qwerty after a reboot or log-off.
It’s on: 1.9.5.0, 1.9.5.1 and 1.9.5.2
The bug is up to 1 or 2 packages I install from elive-repo,
Nvidia-xconfig and/or Nvidia-settings (I need them for my 2. Monitor)
LG
Posbi

Well every time you change the theme, the GTK switcher appears and the startup sound is quite annoying.
Version 1.9.54

Greetings:
Agust

In Menu>Settings>Settings Panel>System, when “Esu” is called, the window asking for root password lacks in my opinion a “close” or “cancel” button.
This could be handy for someone who selected the wrong setting to open, a user that does not know the root password, or anyone who finally prefers to just cancel the requested action.

Additionally, the text about Esu when it asks for password is presently :
“Welcome to Esu, this program will give you access to other users providing you have there password.” This text could be improved and become :
“Welcome to Esu, this program will give you access to other users provided you have their password.” (italics to show corrections)

Don’t know if it’s bug from distro or from my “work” on installed distro.. Well, command hibernate from terminal in root mode works great but from keyboard hotkey settings of from shut down dialog doesn’t work and it claims I have no hibernate able computer..