Elive

Wifi intel 3945ABG don’t run

The firmware aka microcode for the intel 3945 wireless fails to load (update) at boot. This causes the wireless card to be detected but not work properly. It is unusable due to that nature.

In my installation of elive 1.7.8 nvidia drivers work offering only a 800×600 definition.
Installing nvidia-xconfig packages and running it fixes the resolution but breaks glx
Seems the DCC is not properly working.
Samsung X10 laptop.

Hello i tested the 1.8.5 installed on my eeepc and found a bunch of bugs:

• exalt doesn’t recognizes interfaces, so is not possible to connect to anything

• during bootup i had a loop where messages ran very fast on the screen, to fix i had to hard reboot, didn’t happen again yet...this was happening also in 1.8.4

• thunar doesn’t mount devices, no usb pen, nor the usb SD card reader of the eeepc, they are not even seen by thunar

• trying to disable then re-enable exalt results in E17 segfault

• the cpufreq module is unable to change the governor

Beside that the system seems stable, however i can’t test it since no connection to internet.

En la versión 1.8.7 como en la antecesora la 1.8.6 aparte que se cambia de idioma solo el control del raton se hace complicado asin como la utilización de el escritorio, aparte de consumir el 100% de la cpu constantemente.

Program i want see on Elive by prioryti :

Well first remove all game and

My list game i want see on Elive :

Zsnes (super nintende)
mupen 64 (nintendo64)
ePCSXe (playstation)
PCSX2 (playstation 2)
Battlestar galactica DEMO (http://www.game-warden.com/bsg/about.html)

My list of prgram i want see on Elive :

VLC
VirtualBox
code::Blocks
unetbootin-Elive
maybe Amsn2 who used EFL
zEditor (http://www.foxycode.net/zeditor/)

My request for Elive :
write the number version of Elive, on the note with all new work u make

I have burned two 1.9.17 cd’s from two different mirrors and they will not boot, I get this, Error-25- Disk read error

I burned the ISO of 1.9.18 and running the live cd i get to the languages and i can’t click on the ok, it just sits there with the white cursor blinking on the ok button and if i wait long enough it will go into the Verbose mode and then to the resolutions and i can’t move up or down or click on anything my mouse and keyboard don’t work, i have had no problems with mouse and keyboard on the other versions. My mouse is a Logitech LX3 and my keyboard is a Microsoft Digital Media Keyboard

hello,
well, i talk in other post of random crashed, well i think i have found wwhy!

i think he is gadjet, who crashed elive, and we have a segdev windows, and impossible , to connect on my desktop!!

Bonjour,

je parle dans un autre post de crash aléatoire, je pense avoir toruvé ce qui cause ces crash,
je pense au gadjet, car sa m’arrive aprés avoir lancé le gadget du son
voila j’espére avoir une réponse

Black Bar at bottom of my screen. Covers up everything but launch bar, any window thats open (e.i. iceweasel, if i drag it to the bottom of my screen it covers it up)

i have tried restarting enlightenment, going back to original themes, wallpaper, etc.
to no avail.

i belive after i used eltrans and updated my system with this it did it.
elive version:

linux version 2.6.26.8-elive-686

Elive_1.9.23_unstable

Whenever i want to move from normal mode to Full screen mode in Youtube the PC start to work slow and the Clip of Youtube start to work slow ( Just the Video ) but the Audio keeps running well.

Please fix this Problem

I have to say this happened under Compiz!

Regards,
FreeEagle

Whenever i want to install Elive, i have to install a certain Module in order to be able to install Elive on my Hard disk. Is there any Solution for this Problem????

And if i do not have any Internet connection because of the Bug in ADSL and PPPOE Configuration, then there is no any Chance to install Elive on my HDD.

Regards,
FreeEagle

If i use slovenian language keyboard all the keys dont work. There are only few keys working. Aproximatly 10 keys. If i use english language all keys are working but i dont have then support for special regional letters like (Š???Ž)

I noticed this problem in all elive version (stable and development)

This is a picture how the layout is looking like

Acer Aspire One A110L support lacking.
Elive CD Development 1.9.31 iso downloaded and transferred to USB as per the Linux instructions.
Upon boot, system hangs after populating the udev framework, if there is a FAT32 formatted SD card in either the left or the right internal card reader.
If the SD card is not present, boot continues so keymap and resolution can be selected.

Hello,
i ask for a features, because the terminla on Elive, not cool!
we need the best of the terminal :
[quote]
Terminator: A multi-view terminal

Terminator gives the possibility of having multiples terminal within the sa
As such, it makes it easier to handle multiple terminal sessions as for instance, working in one console and monitoring another one without constantly switching from a window to another.

At the moment, Terminator is available for Ubuntu Hardy and Debian Sid. Anyhow, the source are available from https://launchpad.net/terminator/+download. Once installed, you can start a new terminator session by executing terminator :).
From there, you will be able to split views either by Right-Clicking on a terminal view or by typing the following keybindings:
terminator: terminator multi-view terminalterminator: terminator multi-view terminal

• Ctrl-Shift-E: will split the view vertically.
• Ctrl-Shift-O: will split the view horizontally.
• Ctrl-Shift-P: will focus be active on the previous view.
• Ctrl-Shift-N: will focus be active on the next view.
• Ctrl-Shift-W: will close the view where the focus is on.
• Ctrl-Shift-Q: will exit terminator.
• F11: will make terminator go fullscreen.

[/quote]

i hope i can see it on the next release, what do u think about this?

Hi!

I noticed yesterday when i tried after 2 hours of working on Elive (last Dev. Version elive_1.9.37_unstable) to restart my X-server, that the x-server restarts, but it keeps can’t loging in in my system again, and show me just the Black Screen. I have Nvidia Graphic Card, i user the Nvidia Driver shipped with Elive, but not the last one ( the one with Graphic Card up to 512M RAM) my Graphic Card is Nvidia FX 5200 AGP, and the resolution of my Monitor is 1920×1080 Full HD , Viewsonic Flat screen. I had at last to restart my system by pressing at one Ctrl-alt- del combination to restart the estem, because the system did not want to give me anyone of the other console modes to login and do anything. By the way, i added my xorg.conf to add my resolution manually. thats all what i did. Please repare this Problem.

Best Regards,
FreeEagle

This might be considered both a bug and a feature request, depending on your point of wiev.

It is (as of verision 1.9.37, as far as I know also in 1.9.39) impossible to connect to wireless networks protected by WEP encryption using a shared key (as opposed to having an open system).

In the standard connection/network manager application this seems to be due to the fact that there is no oprion to actually set the encryption of a WEP-protected network to “shared” as you don’t get any options besides condifuring the key used (i.e. you can’t select the key index, key number etc).

However, even after switching network management software to something more complete/full-featured (such as Wicd, which I tested) and configuring the connection properly the problem persist, in that it refuses to connect.

The midnight commander is missing. That is the most essential tool around!