Elive

All the problems I have with net-connector since I have started using it, have been ironed out very very fast. I know only have one known minor issue in that I can select wlan0 from eth0 and both are running. I have to disconnect eth0 first then select wlan0 then things are good. The side affects of both running is that pages load very slowly, you think that your card is the problem. Once disconnecting from one then selecting the other things run great. Just thinking of the new users that will get there first experience with Elive 2.0, not myself as I don’t mind dealing with miner issues myself.

Using skype, I discovered the webcam works but the built in microphones do not. The exact model number of this laptop is dv6768se.

when i start in livecd or installed mode i can’t get more than 800×600 in the graphics mode, tried:
graphical-configuration-suite changedriver trident
graphical-configuration-suite resolution 1024×768

but doesn’t work.
my xorg.conf is this: http://debian.pastebin.com/m4ae22372

my laptop is a Gateway solo 9100 with a Trident Microsystems Cyber 9397 who work in Elive 1.0

hi, i’m using the asus eee-pc 900a and everytime i tried watching videos of any kind (flv, avi, ...), the player crashed. i tried totem, mplayer, vlc and so on, but it’s the same with all of them, also there was no bugreport, they where just closed after a second...can you help me?

greetings from germany

virtualbox shows ghost entries:
OSE and normal sun are shown.

Looks like not all the fonts for special languages are installed by default (see google translator for chinese or japanese, or see also to configure hte language with langconf (characters not readable for some languages)), langconf should show ALL the caracters because i have made it one by one and i have read all of them

Could be need to try to install manually some font packages and see which ones are remaining, but WARNING, some fonts packages takes a LOT of space in hard disk and the size of the ISO is pretty limited, install just the ones that are needed, not waste space of the limited ISO size standard

Note: is possible that could be need to restart X after to install a font. Use the livecd mode better

/etc/laptop-mode/conf.d/lcd-brightness.conf

+BATT_BRIGHTNESS_COMMAND="echo 3"
+LM_AC_BRIGHTNESS_COMMAND="echo 15"
+BRIGHTNESS-OUTPUT="/sys/class/backlight/eeepc/brightness"

this is the most up to date and correct link to be set up in laptop-mode tools.

very simply:
EEEPC mute hotkey is not configured

<roxville> <roxville> for Thana: <eshep> roxville, if you see him before i do, ask him about a keymap selector on the bootup blue screens
<roxville> <roxville> <eshep> that should be simple to add
<roxville> <roxville> <eshep> and just have it do an automation of “dpkg-reconfigure console-data” <Thanatermesis> mmmh, keymaps reconfigurator in elpanel doesn’t configure keymaps of console

when using GUI to import a new theme, a file selection window is displayed. The problem is that from the default directory, the “Go up a Directory” button is grayed out (unselectable).

This can be ugly-fixed by clicking “Add to Favorites” button, after which the “Go up a Directory” button is activated.

System - elive 1.9.21-6

Evince can’t open web links, see it at for example this pdf http://www.vimeo.com/groups/cinelerra/file:1612

The video thumbnails in thunar fails when the video is too short (time)

They may also be wrong...

See the videos on your Nokia phone (thanatermesis talks himself) to have an example

ETK Preferences does not change to show different windows for each of the tabs.

EG: When I click on Theme it should show different themes to choose from, and when I click on User Preferences I should see the appropriate window information. Default tab “theme” shows all the time.

Elive 1.9.22 unstable.

Update marillat (multimedia) dependency packages, specially ogmrip to the version 0.12.3 (elm0 report)

Move all the multimedia-repository packages to a new repository branch

For some old computers (like my new old dell latitude c400), the default synaptics configuration not works

It is needed to remove the default configuration of synaptics, use gsynaptics from user instead

Hi all!

I installed this version of Elive Elive_1.9.23_unstable and enabled compiz. Whenever i run AMSN i get a Crash in Compiz and then i click on recover and it work again.

FreeEagle

.

I installed the Elive_1.9.23_unstable and after installing nvidia-settings and started it in the Superuser mode. I had a wierd thing. It changed the default Keyboard from German to English and could not restore it again to German.

Regards,
FreeEagle

Under this version of Elive Elive_1.9.23_unstable

whenever i try to activate the Audio mixer Gadget it just dissapear on the next start, but what i realized that it does not dissapear completly, it still there but i have to change the resolution of my Monitor to see it on its place. I have 1024 x 1280

but when i move to 1024x 768 i found this Gadget there. (Wierd)

Hi!
My Notebook’s wifi does not work with Elive. It’s not even recognizing it’s wifi-device.
As far as I know it’s using an SIS163u wifi-device.

Hi there,

when I plug in my external DVD writer then the following appears in my syslog (/var/log/messages);

Feb 25 19:22:13 T60 kernel: [ 5452.607785] usbcore: registered new interface driver usb-storage
Feb 25 19:22:13 T60 kernel: [ 5452.607796] USB Mass Storage support registered.
Feb 25 19:22:18 T60 kernel: [ 5457.632201] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-S082H SB00 PQ: 0 ANSI: 0
Feb 25 19:22:18 T60 kernel: [ 5457.748480] Driver ‘sr’ needs updating - please use bus_type methods
Feb 25 19:22:18 T60 kernel: [ 5457.764735] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Feb 25 19:22:18 T60 kernel: [ 5457.764747] Uniform CD-ROM driver Revision: 3.20
Feb 25 19:22:18 T60 kernel: [ 5457.839674] sd 0:0:0:0: Attached scsi generic sg0 type 0
Feb 25 19:22:18 T60 kernel: [ 5457.839867] sd 1:0:0:0: Attached scsi generic sg1 type 0
Feb 25 19:22:18 T60 kernel: [ 5457.840431] sr 2:0:0:0: Attached scsi generic sg2 type 5

When I insert an Audio CD there is no more message concerning that in the log. Alsothe CD doesn’t appear somewhere like e.g. in Thunar or the filesystem under /mnt or /media. Shouldn’t it?

Some device icons (like USBs) of the elive icons theme, needs to have a transparent background

For example, when umounting a USB device from thunar, there’s a popup from the corner of the screen with a message and a icon with a non-transparent background

Games like Wolfenstein not works directly by default, made a compatibility for this, start by add a script to load all the snd-*-oss modules at the init of the system, then see if directly works or needs to run with “aoss” (not so nice way (userfriendly))

http://en.gentoo-wiki.com/wiki/Enemy_Territory

http://www.gentoo-wiki.info/TIP_ALSA_with_Quake3/Enemy_Territory

when is copying a video, it does a kind of ugly try to made a preview a lot of times, this slows down the computer too, for that, use a kind of tracer (name of file > logs, if name of actual file is equal to logs, wait 30 seconds before to try to do the preview)

Looks like it is not really possible to have a full utf-8 working system on console mode, this mades a lot of translated messages (like in spanish(á, é, í...), or russian) bad readable, broken, crappy...

Maybe is a fixable bug since looks like to work in the installed system

If is not fixable, remove liveboot translations

during install get error not enough free space message reads
filesystem 1kblocks used availible used% mounted on
udev 10240 84 10156 1% /dev
tmpfs