|
344 | 2009-02-16 | 2017-08-25 | Feature Request | limit windows to be in the screen | Closed | thanatermesis | |
3.0 | 1 |
Task Description
Could be nice if we have an e17 module to limit the windows to be in the screen limits, instead to pass over it. This is a useful feature for non-experienced users.
Note: this report has somewhere (i dont remember where) a list of features needed, like which options to have on it (like: limit the windows to be in-screen, limit the windows to be not entirely out of the screen, allow the window to be partially out, etc etc), is needed to check this list first (in hackers or in dev ? i dont remember right now)
Useful code: iirk module
|
|
513 | 2009-12-03 | 2017-08-02 | Bug Report | Wifi problem on Dell D410 | Closed | ghatt | |
3.0 | 1 |
Task Description
Hi, I use elive installed on a Dell D410 laptop with Broadcom BCM4311 wifi card. I can see networks, but I’m unable to connect to anyone because dhclient is unable to obtain an IP address. I tried other wifi cards (Realtek, D-Link), and it is always same problem. All these cards are supported by Debian Lenny or Ubuntu 8.04. I really like elive and wouldn’t go back to Lenny because of this wifi problem.
Thanks for help. G. Hatt
uname -r: 2.6.26.8-elive-686
lspci : 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC’97 Audio Controller (rev 03) 00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC’97 Modem Controller (rev 03) 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) 01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01) 02:01.0 CardBus bridge: Texas Instruments PCI6515 Cardbus Controller 02:01.5 Communication controller: Texas Instruments PCI6515 SmartCard Controller 02:03.0 Network controller: Broadcom Corporation BCM4311 [AirForce 54g] 802.11a/b/g PCI Express Transceiver (rev 02)
|
|
553 | 2010-03-06 | 2010-03-15 | Bug Report | swedish boot option | Closed | thanatermesis | |
3.0 | 1 |
Task Description
<PrinceAMD> Thanatermesis, <Elive_user25_en> If one choose swedish as language in textmode boot. <PrinceAMD> <Elive_user25_en> Everything is translated into... <PrinceAMD> <Elive_user25_en> finnish. <PrinceAMD> <Elive_user25_en> that has not one word in common with swedish
|
|
555 | 2010-03-06 | 2014-06-05 | Bug Report | volume still setup to 100% after first install of Topaz | Closed | conny | |
3.0 | 1 |
Task Description
After upgrade system from ISO the volume setup to 100% - too loud for the first time..
|
|
576 | 2010-04-27 | 2020-10-05 | Bug Report | net-connector: Stop to SCAN networks if we are connecte ... | Closed | thanatermesis | |
3.0 | 1 |
Task Description
If we are already connected to internet is useless to scan about networks, disable the scan until we are disconnected (the non-stop scanning thing makes that some wireless drivers blocks and a reboot is required to recover the connection)
|
|
527 | 2010-01-13 | 2010-01-24 | Bug Report | ATI driver won't work with ecomorph | Closed | chdrsto | |
3.0 | |
Task Description
I`m running 1.9.56 development Version on my Laptop with a X1300 Mobility radeon. Compiz works under Ubuntu 9.10 out of the box. I use there the OSS ati driver.
On Elive there seems to be a bug with the included ati driver. I’ve tried several Notebooks with ATI graphic cards. None of them worked. On every machine I’ve got the following message:
$> ecomorph
ecomorph (core) - Fatal: No GLXFBConfig for default depth, this isn't going to work.
ecomorph (core) - Error: Failed to manage screen: 0
ecomorph (core) - Fatal: No manageable screens found on display :0.0
a compiz-check shows, that everything should be ok:
$> compiz-check
Gathering information about your system...
Distribution: Debian GNU/Linux (5.0.3)
Desktop environment: Unknown
Graphics chip: ATI Technologies Inc M52 [Mobility Radeon X1300]
Driver in use: radeon
Rendering method: AIGLX
Checking if it's possible to run Compiz on your system...
Checking for texture_from_pixmap... [ OK ]
Checking for non power of two support... [ OK ]
Checking for composite extension... [ OK ]
Checking for FBConfig... [ OK ]
Checking for hardware/setup problems... [ OK ]
To manualy compile the driver won’t work. It aborts.
regards Dragan
|
|
158 | 2007-09-07 | 2017-08-25 | Bug Report | Cinelerra won't launch under "tests" e17 | Closed | rebbi | |
3.0 | |
Task Description
Cinelerra won’t launch for me using the latest e17 from the “tests” branch of the Elive repos (it has never launched, even when I tried it under the default e17 from Gem).
When I try to run it, I get a small, transparent window in the upper left corner of my screen. When I close that window, I get this error message:
“Application Execution Error: Cinelerra stopped running unexpectedly. There was no error message. An exit code of 1 was /usr/bin/cinelerra.”
By the way, it does launch under e16, but with an error message about memory...
|
|
174 | 2007-11-20 | 2017-08-25 | Bug Report | Kino does not capture | Closed | sicaria | |
3.0 | |
Task Description
Hi all! I’ve try to capture whit kino, but give me this error:
WARNING: raw1394 kernel module not loaded or faliure to read/write /dev/raw1394!
what can i do? thanx!!!
|
|
262 | 2008-10-16 | 2017-08-25 | Feature Request | Wacom | Closed | thanatermesis | |
3.0 | |
Task Description
Made something nice to made working by default wacom devices in Elive
|
|
286 | 2008-11-07 | 2017-08-26 | Feature Request | amsn SVN is now supporting audio-video conferencing and ... | Closed | assasukasse | |
3.0 | |
Task Description
amsn in svn now supports audio conferencing as well as audio video calls. also is very stable. tested in ubuntulu
|
|
293 | 2008-11-11 | 2017-08-25 | Feature Request | Gdebi should notice user when installing manually packa ... | Closed | assasukasse | |
3.0 | |
Task Description
installing unofficial packages is a very bad practice, it can broke the system. We need to notice the user with a popup in gdebi about this issue.
|
|
317 | 2008-12-11 | 2017-08-25 | Bug Report | Fonts for special languages not installed by default | Closed | thanatermesis | |
3.0 | |
Task Description
Looks like not all the fonts for special languages are installed by default (see google translator for chinese or japanese, or see also to configure hte language with langconf (characters not readable for some languages)), langconf should show ALL the caracters because i have made it one by one and i have read all of them
Could be need to try to install manually some font packages and see which ones are remaining, but WARNING, some fonts packages takes a LOT of space in hard disk and the size of the ISO is pretty limited, install just the ones that are needed, not waste space of the limited ISO size standard
Note: is possible that could be need to restart X after to install a font. Use the livecd mode better
|
|
319 | 2008-12-12 | 2017-08-25 | Bug Report | eeepc brightness apci script should be linked to correc ... | Closed | assasukasse | |
3.0 | |
Task Description
/etc/laptop-mode/conf.d/lcd-brightness.conf
+BATT_BRIGHTNESS_COMMAND="echo 3"
+LM_AC_BRIGHTNESS_COMMAND="echo 15"
+BRIGHTNESS-OUTPUT="/sys/class/backlight/eeepc/brightness"
this is the most up to date and correct link to be set up in laptop-mode tools.
|
|
345 | 2009-02-16 | 2017-08-25 | Feature Request | Popup information for windows | Closed | thanatermesis | |
3.0 | |
Task Description
Like it says in the review article http://news.softpedia.com/news/Elive-Compiz-104523.shtml , when you mouse-in around a window in the pager or the minimized applications, there’s not a kind of popup information about “what” is that window, could be nice to add this feature ?
|
|
365 | 2009-02-25 | 2017-03-16 | Feature Request | aMule has wrong configuration (download dirs) | Closed | thanatermesis | |
3.0 | |
Task Description
The default download directories of aMule are not userfriendly at all
|
|
369 | 2009-03-03 | 2017-03-16 | Bug Report | OSS compatibility | Closed | thanatermesis | |
3.0 | |
Task Description
Games like Wolfenstein not works directly by default, made a compatibility for this, start by add a script to load all the snd-*-oss modules at the init of the system, then see if directly works or needs to run with “aoss” (not so nice way (userfriendly))
http://en.gentoo-wiki.com/wiki/Enemy_Territory
http://www.gentoo-wiki.info/TIP_ALSA_with_Quake3/Enemy_Territory
|
|
379 | 2009-03-07 | 2017-03-16 | Feature Request | HandBrake | Closed | FreeEagle | |
3.0 | |
Task Description
HandBrake is an open-source, GPL-licensed, multiplatform, multithreaded video transcoder, available for MacOS X, Linux and Windows.
http://handbrake.fr/
Supported sources:
Outputs:
Misc features:
Chapter selection
Basic subtitle support (burned into the picture)
Integrated bitrate calculator
Picture deinterlacing, cropping and scaling
Grayscale encoding
Would you please add this Programm to the Repos.
Best Regards, FreeEagle
|
|
384 | 2009-03-24 | 2017-08-25 | Feature Request | wifi link intel pro 5100 agn | Closed | ManuMan29 | |
3.0 | |
Task Description
The intel pro 5100 wifi card doesn’t work with Elive. There is an Intel driver : intel linux driver but I’m a newbie and I don’t know how to install it ... Somebody can help me ? thanks!
|
|
442 | 2009-07-19 | 2017-08-26 | Bug Report | eeepc-elive-scripts patch (camera not working) | Closed | gasha | |
3.0 | |
Task Description
See diff for /etc/init.d/eeepc-elive-scripts:
#diff eeepc-elive-scripts.old eeepc-elive-scripts 23c23 < echo -n 1 » /proc/acpi/asus/camera 2>/dev/null —
echo -n 1 » /sys/devices/platform/eeepc/camera 2>/dev/null
Reason: 2.6.26 and later kernel has moved /proc/acpi/asus to /sys/devices/platform/eeepc
I will check also other scripts, volume, brightness, etc...
|
|
457 | 2009-08-17 | 2017-08-25 | Bug Report | Intel Wireless pro 5100AGN card not working | Closed | leanmoha | |
3.0 | |
Task Description
problems getting Intel Wireless pro 5100AGN card working. According to all wiki the iwlagn module and mac8*** module required to run these cards should be built into the kernel but not there and for some reason elive doesn’t allow its installation. The iwlagn module is different from the iwp module.
|
|
462 | 2009-08-25 | 2017-08-26 | Bug Report | .xsession-errors | Closed | thanatermesis | |
3.0 | |
Task Description
.xsession-errors file of the home of the users, contains the logs of the X when they are running, this should be removed at every e17 startup
|
|
463 | 2009-08-25 | 2017-08-27 | Bug Report | Power management | Closed | thanatermesis | |
3.0 | |
Task Description
Use only one power management daemon, maybe disable cpufreq of e17 and use only gnome-powermanager IF is a laptop ? maybe ask that ? maybe predefine selection by hardware specs ?
|
|
465 | 2009-08-25 | 2017-08-25 | Feature Request | Request for 802.1x wireless authentification to be incl ... | Closed | ndegekubwa | |
3.0 | |
Task Description
PLEASE be describable, clear, and direct. Think that we need to understand, found, and solve the bug.
I would like to request that 802.1x authentification be added to the wireless network connector utility. The company where I work uses this mode of wireless authentification. It would be a great convenience to me at work, as I have to use a wired connection otherwise.
|
|
477 | 2009-09-05 | 2010-01-22 | Bug Report | network tool doesn't work | Closed | rindi | |
3.0 | |
Task Description
In the latest compiz dev release (1.9.42 unstable compiz) I can’t enter a static IP. It always reverts back to dhcp when I try to apply the proper address.
|
|
484 | 2009-09-23 | 2017-08-26 | Bug Report | module slamr does not exist bug STILL EXISTS (not cured ... | Closed | Vincente | |
3.0 | |
Task Description
Hi, sorry to have to report, I just tried to install (with a proven DVD download of E17 compiz) on a 2nd computer, Intel MB DG45FC. First problem was it would not recognize display resolution, I am using Mitsubishi Diamond Digital, wide screen (16 x 9) and factory default setting called for is 1280 x 768 at 60HZ—which is in listed choices upon installation, nor any other resolution including auto? This is a 64bit machine, I have the DVD installed OK, no problem, on a Gigabyte 32bit MB.
I kept trying, over and over and somehow was able to “force” installation after being given a choice to use a pre-existing resolution(?) Install completed, fine tune came up and stopped at: “module slamr does not exist in /proc/modules. Also, internet connect was not able to be made, no matter what I tried so I can make no correction through apt-get, Synaptic or .deb. I also got a notice that e17 economorph failed to install because of some file in libdecorate(?) was trying to overwrite an already existing file. Not being technically capable, I haven’t a clue.
But please, do not fool yourself into thinking the slamr “bub” has been corrected and gone away, it is still there.
|
|
487 | 2009-10-05 | 2017-08-25 | Feature Request | kernel added in grub when installed | Closed | thanatermesis | |
3.0 | | |
|
489 | 2009-10-09 | 2017-08-26 | Bug Report | double wireless interfaces is not correctly managed | Closed | thanatermesis | |
3.0 | | |
|
494 | 2009-10-17 | 2017-08-26 | Bug Report | Installing crossover games causes X server/enlightenmen ... | Closed | Juzz | |
3.0 | | |
|
497 | 2009-10-21 | 2017-08-25 | Feature Request | OSD volume menu | Closed | conny | |
3.0 | | |
|
504 | 2009-11-01 | 2017-08-25 | Feature Request | MSI 5200le onli 640x480 resolution avaliable | Closed | elpiloto | |
3.0 | | |
|
505 | 2009-11-01 | 2017-08-25 | Bug Report | 1.9.42 compiz - wlan0 .... kernel panic!! RTL-818 ... | Closed | elpiloto | |
3.0 | | |
|
512 | 2009-12-02 | 2017-08-26 | Bug Report | Protected EAP (PEAP) network authentication support? | Closed | leanmoha | |
3.0 | | |
|
515 | 2009-12-14 | 2017-08-25 | Feature Request | Some Feature-Requests | Closed | AlexAnteMachina | |
3.0 | | |
|
517 | 2009-12-24 | 2010-03-13 | Bug Report | Problems changing the theme!! | Closed | verdegal37 | |
3.0 | | |
|
524 | 2009-12-29 | 2010-01-21 | Feature Request | always visible gadgets not only by pressing ctrl+alt+g | Closed | conny | |
3.0 | | |
|
533 | 2010-01-29 | 2017-08-25 | Feature Request | ican't remove ICEWEALS | Closed | Issa | |
3.0 | | |
|
541 | 2010-02-04 | 2017-08-26 | Bug Report | Enlightenment SEGV while changing resolution | Closed | Werni | |
3.0 | | |
|
542 | 2010-02-04 | 2017-08-26 | Bug Report | tick mark in Screen Resolution Setting box is not being ... | Closed | Werni | |
3.0 | | |
|
554 | 2010-03-06 | 2017-08-25 | Bug Report | 2.0 : scrolling disabled with touchpad | Closed | Yucca | |
3.0 | | |
|
556 | 2010-03-06 | 2017-08-25 | Feature Request | Upgrade system feature request | Closed | conny | |
3.0 | | |
|
557 | 2010-03-06 | 2017-08-26 | Bug Report | Unexpected end of editing features - F1 recovery E17 er ... | Closed | conny | |
3.0 | | |
|
558 | 2010-03-07 | 2017-08-25 | Feature Request | Better Volume Control | Closed | jareddkingg | |
3.0 | | |
|
559 | 2010-03-08 | 2017-08-25 | Bug Report | hibernate wake-up problem | Closed | conny | |
3.0 | | |
|
562 | 2010-03-20 | 2010-03-20 | Bug Report | autolaunchers with spaces | Closed | thanatermesis | |
3.0 | | |
|
563 | 2010-03-21 | 2017-08-25 | Bug Report | vpn ad-hoc | Closed | Pacma | |
3.0 | | |
|
567 | 2010-03-26 | 2017-08-25 | Feature Request | printer applet autorun | Closed | thanatermesis | |
3.0 | | |
|
568 | 2010-03-28 | 2017-08-26 | Bug Report | 3g-dialer doesn't ask for user, password, apn. | Closed | maceiras | |
3.0 | | |
|
573 | 2010-04-08 | 2017-08-25 | Bug Report | autolaunchers: disable when needed (gparted) | Closed | thanatermesis | |
3.0 | | |
|
586 | 2010-08-12 | 2017-08-27 | Bug Report | Shared Folders: read-write not working | Closed | anabell | |
3.0 | | |
|
596 | 2012-09-07 | 2017-08-26 | Bug Report | smb-usershare some warning messages | Closed | thanatermesis | |
3.0 | | |